Full Text
DOMINICK PANGALLO MAYOR CITY OF SALEM, MASSACHUSETTS BOARD OF HEALTH 98 WASHINGTON STREET, 3RD FLOOR SALEM, MA 01970 TEL. (978) 741-1800 [EMAIL REDACTED] DAVID GREENBAUM, RS, CHO HEALTH AGENT FOOD ESTABLISHMENT PLAN REVIEW APPLICATION (Application must be submitted at least 30 days before construction begins) Fee: $180.00 (Make checks payable to City of Salem - No cash is accepted) _____MAJOR RENOVATION Date: Name of Establishment: Category: Restaurant____, Institution Daycare Retail Market Address: Name of Owner: Mailing Address: Telephone: Applicant's Name: Title (owner, manager, architect, Mailing Address: Telephone: I have submitted plans/applications to the following authorities on the following dates: __________Licensing Board __________Plumbing __________Electric __________Planning __________Building __________Conservation ( ) Hours of Operation: Sun Thurs______ Mon Fri Tues______ Sat Wed ---PAGE BREAK--- Number of Seats: Number of Staff: (Maximum per shift) Total Square Feet of Facility: Number of Floors on which operations are conducted__________ Maximum Meals to be Served: (approximate number) Breakfast Lunch Dinner Projected Date for Start of Project: Projected Date for Completion of Project: Type of Service: (check all that apply) Sit Down Meals Take Out Caterer Mobile Vendor Other Please enclose the following documents: Proposed Menu (including seasonal, off-site, and banquet menus) Manufacturer Specification sheets for each piece of equipment shown on the plan Site plan showing location of business in building; location of building on site including alleys, streets; and location of any outside equipment (dumpsters, well, septic system - if applicable) Plan (floor and elevations shown) drawn to scale of food establishment showing location of equipment, plumbing, electrical services, and mechanical ventilation Equipment schedule ---PAGE BREAK--- CONTENTS AND FORMAT OF PLANS AND SPECIFICATIONS 1. Provide plans that are a minimum of 11 x 14 inches in size including the layout of the floor plan accurately drawn to a minimum scale of 1/4 inch = 1 foot. This is to allow for ease in reading plans. 2. Include: proposed menu, seating capacity, and projected daily meal volume for food service operations. 3. Show the location and elevated drawings of all food equipment. Each piece of equipment must be clearly labeled on the plan with its common name. Submit drawings of self-service hot and cold holding units with sneeze guards. 4. Designate clearly on the plan equipment for adequate rapid cooling, including ice baths and refrigeration, and for hot-holding potentially hazardous foods. 5. Label and locate separate food preparation sinks when the menu dictates to preclude contamination and cross-contamination of raw and ready-to-eat foods. 6. Clearly designate adequate hand washing lavatories for each toilet fixture and in the immediate area of food preparation. 7. Provide the room size, aisle space, space between and behind equipment and the placement of the equipment on the floor plan. 8. On the plan represent auxiliary areas such as storage rooms, garbage rooms, toilets, basements, and/or cellars used for storage or food preparation. Show all features of these rooms as required by this guidance manual. 9. Include and provide specifications for: a. Entrances, exits, loading/unloading areas, and docks; b. Complete finish schedules for each room including floors, walls, ceilings, and coved juncture bases; c. Plumbing schedule including location of floor drains, floor sinks, water supply lines, overhead waste-water lines, hot water generating equipment with capacity and recovery rate, backflow prevention, and wastewater line connections; d. Lighting schedule with protectors; At least 110 lux (10 foot candles) at a distance of 75 cm (30 inches) above the floor, in walk-in refrigeration units and dry food storage areas and in other areas and rooms during periods of cleaning; At least 220 lux (20 foot candles): At a surface where food is provided for consumer self-service such as buffets and salad bars or where fresh produce or packaged foods are sold or offered for consumption; Inside equipment such as reach-in and under-counter refrigerators; ---PAGE BREAK--- At a distance of 75 cm (30 inches) above the floor in areas used for hand washing, ware washing, and equipment and utensil storage, and in toilet rooms; and At least 540 lux (50 foot candles) at a surface where a food employee is working with food or working with utensils or equipment such as knives, slicers, grinders, or saws where employee safety is a factor. e. Food Equipment schedule to include make and model numbers and listing of equipment that is certified or classified for sanitation by an ANSI accredited certification program (when applicable); f. Source of water supply and method of sewage disposal. Provide the location of these facilities and submit evidence that state and local regulations are complied with; g. A color coded flow chart demonstrating flow patterns for: -food (receiving, storage, preparation, service); -food and dishes (portioning, transport, service); -dishes (clean, soiled, cleaning, storage); -utensil (storage, use, cleaning); -trash and garbage (service area, holding, storage); h. Ventilation schedule for each room; i. A mop sink or curbed cleaning facility with facilities for hanging wet mops; j. Garbage can washing area/facility; k. Cabinets for storing toxic chemicals; l. Dressing rooms, locker areas, employee rest areas, and/or coat rack as required; m. Completed Section 1; n. Site plan (plot plan). FOOD PREPARATION REVIEW Check categories of Potentially Hazardous Foods (PHF's) to be handled, prepared, and served. CATEGORY* (YES) (NO) 1. Thin meats, poultry, fish, eggs (hamburger; sliced meats; fillets) ( ) ( ) 2. Thick meats, whole poultry (roast beef; whole turkey, chickens, hams) ( ) ( ) 3. Cold processed foods (salads, sandwiches, vegetables) ( ) ( ) 4. Hot processed foods (soups, stews, rice/noodles, gravy, chowders, casseroles) ( ) ( ) 5. Bakery goods (pies, custards, cream fillings & toppings) ( ) ( ) 6. * A generic HACCP plan for each category of food may be available from the regulatory authority for reference. ---PAGE BREAK--- PLEASE CIRCLE/ANSWER THE FOLLOWING QUESTIONS FOOD SUPPLIES: 1. Are all food supplies from inspected and approved sources? YES / NO 2. What are the projected frequencies of deliveries for frozen Refrigerated foods and Dry 3. Provide information on the amount of space (in cubic feet) allocated for: Dry storage Refrigerated Storage and Frozen storage 4. How will dry goods be stored off the floor? COLD STORAGE: 1. Is adequate and approved freezer and refrigeration available to store frozen foods frozen and refrigerated foods at 41°F (5°C) and below? YES / NO Provide the method used to calculate cold storage requirements. 2. Will raw meats, poultry, and seafood be stored in the same refrigerators and freezers with cooked/ready-to-eat foods? YES / NO If yes, how will cross-contamination be prevented? 3. Does each refrigerator/freezer have a thermometer? YES / NO Number of refrigeration units: Number of freezer units: 4. Is there a bulk ice machine available? YES / NO ---PAGE BREAK--- THAWING FROZEN POTENTIALLY HAZARDOUS FOOD: Please indicate by checking the appropriate boxes how frozen potentially hazardous foods (PHF's) in each category will be thawed. More than one method may apply. Also, indicate where thawing will take place. Thawing Method *THICK FROZEN FOODS *THIN FROZEN FOODS Refrigeration Running Water Less than 70°F(21°C) Microwave (as part of cooking process) Cooked from Frozen state Other (describe) *Frozen foods: approximately one inch or less = thin, and more than an inch = thick. COOKING: 1. Will food product thermometers be used to measure final cooking/reheating temperatures of PHF's? YES / NO What type of temperature measuring device: Minimum cooking time and temperatures of product utilizing convection and conduction heating equipment: beef roasts 130°F (121 min) solid seafood pieces 145°F (15 sec) other PHF's 145°F (15 sec) eggs: Immediate service 145°F (15 sec) pooled* 155°F (15 sec) (*pasteurized eggs must be served to a highly susceptible population) pork 145°F (15 sec) comminuted meats/fish 155°F (15 sec) poultry 165°F (15 sec) reheated PHF's 165°F (15 sec) ---PAGE BREAK--- 2. List types of cooking equipment. HOT/COLD HOLDING: 1. How will hot PHF's be maintained at 140°F (60°C) or above during holding for service? Indicate type and number of hot holding units. 2. How will cold PHF's be maintained at 41°F (5°C) or below during holding for service? Indicate type and number of cold holding units. COOLING: Please indicate by checking the appropriate boxes how PHF's will be cooled to 41°F (5°C) within 6 hours (140°F to 70°F in 2 hours and 70°F to 41°F in 4 hours). Also, indicate where the cooling will take place. COOLING METHOD THICK MEATS THIN MEATS THIN SOUPS/ GRAVY THICK SOUPS/ GRAVY RICE/ NOODLES Shallow Pans Ice Baths Reduce Volume or Size Rapid Chill Other (describe) ---PAGE BREAK--- REHEATING: 1. How will PHF's that are cooked, cooled, and reheated for hot holding be reheated so that all parts of the food reach a temperature of at least 165°F for 15 seconds. Indicate type and number of units used for reheating foods. 2. How will reheating food to 165°F for hot holding be done rapidly and within 2 hours? PREPARATION: 1. Please list categories of foods prepared more than 12 hours in advance of service. 2. Will food employees be trained in good food sanitation practices? YES / NO Method of training: Number(s) of employees: Dates of completion: 3. Will disposable gloves and/or utensils and/or food grade paper be used to prevent handling of ready-to-eat foods? YES / NO 4. Is there a written policy to exclude or restrict food workers who are sick or have infected cuts and lesions? YES / NO Please describe briefly: Will employees have paid sick leave? YES / NO ---PAGE BREAK--- 5. How will cooking equipment, cutting boards, counter tops, and other food contact surfaces which cannot be submerged in sinks or put through a dishwasher be sanitized? Chemical Type: Concentration: Test Kit: YES / NO 6. Will ingredients for cold ready-to-eat foods such as tuna, mayonnaise, and eggs for salads and sandwiches be pre-chilled before being mixed and/or assembled? YES/NO If not, how will ready-to-eat foods be cooled to 41°F? 7. Will all produce be washed on-site prior to use? YES / NO Is there a planned location used for washing produce? YES / NO If not, describe the procedure for cleaning and sanitizing multiple use sinks between uses. 8. Describe the procedure used for minimizing the length of time PHF's will be kept in the temperature danger zone (41°F - 140°F) during preparation. 9. Provide a HACCP plan for specialized processing methods such as vacuum packaged food items prepared on-site or otherwise required by the regulatory authority. ---PAGE BREAK--- 10. Will the facility be serving food to a highly susceptible population? YES / NO If yes, how will the temperature of foods be maintained while being transferred between the kitchen and service area? A. FINISH SCHEDULE Applicant must indicate which materials (quarry tile, stainless steel, 4" plastic coved molding, etc.) will be used in the following areas. Kitchen FLOOR COVING WALLS CEILING Bar Food Storage Other Storage Toilet Rooms Dressing Rooms Garbage & Refuse Storage Mop Service Basin Area Ware washing Area Walk-in Refrigerators and Freezers ---PAGE BREAK--- B. INSECT AND RODENT CONTROL APPLICANT: Please check appropriate boxes. YE S NO NA 1. Will all outside doors be self-closing and rodent proof? ( ) ( ) ( ) 2. Are screen doors provided on all entrances left open to the outside? ( ) ( ) ( ) 3. Do all openable windows have a minimum #16 mesh screening? ( ) ( ) ( ) 4. Is the placement of electrocution devices identified on the plan? ( ) ( ) ( ) 5. Will all pipes & electrical conduit chases be sealed; ventilation systems exhaust and intakes protected? ( ) ( ) ( ) 6. Is area around building clear of unnecessary brush, litter, boxes, and other harborage? ( ) ( ) ( ) 7. Will air curtains be used? If yes, where? ( ) ( ) ( ) C. GARBAGE AND REFUSE Inside 8. Do all containers have lids? ( ) ( ) ( ) 9. Will refuse be stored inside? ( ) ( ) ( ) If so, where? 10. Is there an area designated for garbage can or floor mat cleaning? ( ) ( ) ( ) Outside 11. Will a dumpster be used? Number Size Frequency of pickup Contractor ( ) ( ) ( ) 12. Will a compactor be used? Number Size Frequency of pick up Contractor ( ) ( ) ( ) 13. Will garbage cans be stored outside? ( ) ( ) ( ) ---PAGE BREAK--- 14. Describe surface and location where dumpster/compactor/garbage cans are to be stored. 15. Describe location of grease storage 16. Is there an area to store recycled containers? ( ) ( ) ( ) Indicate what materials are required to be recycled; ( ) Glass ( ) Metal ( ) Paper ( ) Cardboard ( ) Plastic 17. Is there any area to store returnable damaged goods? ( ) ( ) ( ) D. PLUMBING CONNECTIONS AIR GAP AIR BREAK *INTEGRAL TRAP TRAP VACUUM BREAKER CONDENSATE PUMP 18. Toilet 19. Urinals 20. Dishwasher 21. Garbage Grinder ---PAGE BREAK--- 22. Ice machines 23. Ice storage bin 24. Sinks a. Mop b. Janitor c. Hand wash d. 3 Compartmen t e. 2 Compartmen t f. 1 Compartmen t g. Water Station 25. Steam tables 26. Dipper wells 27. Refrigeration condensate/ drain lines 28. Hose connection 29. Potato peeler 30. Beverage Dispenser w/carbonator ---PAGE BREAK--- 31. Other * TRAP: A fitting or device which provides a liquid seal to prevent the emission of sewer gases without materially affecting the flow of sewage or wastewater through it. An integral trap is one that is built directly into the fixture, e.g., a toilet fixture. A trap is a fixture trap that provides a liquid seal in the shape of the letter Full traps are prohibited. 32. Are floor drains provided & easily cleanable? If so, indicate location: E. WATER SUPPLY 33. Is water supply public ( ) or private ( 34. If private, has source been approved? YES ( ) NO ( ) PENDING ( ) Please attach copy of written approval and/or permit. 35. Is ice made on premises ( ) or purchased commercially ( If made on premise, are specifications for the ice machine provided? YES ( ) NO ( ) Describe provision for ice scoop storage: Provide location of ice maker or bagging 36. What is the capacity of the hot water generator? 37. Is the hot water generator sufficient for the needs of the establishment? Provide calculations for necessary hot water (see Part 5 & Part 9 Under Section III in this manual) 38. Is there a water treatment device? YES ( ) NO ( ) If yes, how will the device be inspected & serviced? 39. How are backflow prevention devices inspected & serviced? ---PAGE BREAK--- F. SEWAGE DISPOSAL 40. Is building connected to a municipal sewer? YES ( ) NO ( ) 41. If no, is private disposal system approved? YES ( ) NO ( ) PENDING ( ) Please attach copy of written approval and/or permit. 42. Are grease traps provided? YES ( ) NO ( ) If so, where? Provide schedule for cleaning & G. DRESSING ROOMS 43. Are dressing rooms provided? YES ( ) NO ( ) 44. Describe storage facilities for employees' personal belongings purse, coats, boots, umbrellas, etc.) H. GENERAL 45. Are insecticides/rodenticides stored separately from cleaning & sanitizing agents? YES ( ) NO ( ) Indicate location: 46. Are all toxics for use on the premise or for retail sale (this includes personal medications), stored away from food preparation and storage areas? YES ( ) NO ( ) 47. Are all containers of toxics including sanitizing spray bottles clearly labeled? YES ( ) NO ( ) 48. Will linens be laundered on site? YES ( ) NO ( ) If yes, what will be laundered and where? If no, how will linens be cleaned? 49. Is a laundry dryer available? YES ( ) NO ( ) ---PAGE BREAK--- 50. Location of clean linen storage: 51. Location of dirty linen storage: 52. Are containers constructed of safe materials to store bulk food products? YES ( ) NO ( ) Indicate type: 53. Indicate all areas where exhaust hoods are installed: LOCATION FILTERS &/OR EXTRACTION DEVICES SQUARE FEET FIRE PROTECTION AIR CAPACITY CFM AIR MAKEUP CFM 54. How is each listed ventilation hood system cleaned? I. SINKS 55. Is a mop sink present? YES ( ) NO ( ) If no, please describe facility for cleaning of mops and other equipment: 56. If the menu dictates, is a food preparation sink present? YES ( ) NO ( ) ---PAGE BREAK--- J. DISHWASHING FACILITIES 57. Will sinks or a dishwasher be used for ware washing? Dishwasher ( ) Two compartment sink ( ) Three compartment sink ( ) 58. Dishwasher Type of sanitization used: Hot water (temp. provided) Booster heater Chemical type Is ventilation provided? YES ( ) NO ( ) 59. Do all dish machines have templates with operating instructions? YES ( ) NO ( ) 60. Do all dish machines have temperature/pressure gauges as required that are accurately working? YES ( ) NO ( ) 61. Does the largest pot and pan fit into each compartment of the pot sink? YES ( ) NO ( ) If no, what is the procedure for manual cleaning and sanitizing? 62. Are there drain boards on both ends of the pot sink? YES ( ) NO ( ) 63. What type of sanitizer is used? Chlorine Iodine Quaternary Ammonium Hot Water Other ( ) ( ) ( ) ( ) ( ) ( ) 64. Are test papers and/or kits available for checking sanitizer concentration? YES ( ) NO ( ) ---PAGE BREAK--- K. HANDWASHING/TOILET FACILITIES 65. Is there a hand washing sink in each food preparation and ware washing area? YES ( ) NO ( ) 66. Do all hand washing sinks, including those in the restrooms, have a mixing valve or combination faucet? YES ( ) NO ( ) 67. Do self-closing metering faucets provide a flow of water for at least 15 seconds without the need to reactivate the faucet? YES ( ) NO ( ) 68. Is hand cleanser available at all hand washing sinks? YES ( ) NO ( ) 69. Are hand drying facilities (paper towels, air blowers, etc.) available at all hand washing sinks? YES ( ) NO ( ) 70. Are covered waste receptacles available in each restroom? YES ( ) NO ( ) 71. Is hot and cold running water under pressure available at each hand washing sink? YES ( ) NO ( ) 72. Are all toilet room doors self-closing? YES ( ) NO ( ) 73. Are all toilet rooms equipped with adequate ventilation? YES ( ) NO ( ) 74. Is a hand washing sign posted in each employee restroom? YES ( ) NO ( ) L. SMALL EQUIPMENT REQUIREMENTS 75. Please specify the number, location, and types of each of the following: Slicers Cutting boards Can openers Mixers Floor mats Other ---PAGE BREAK--- STATEMENT: I hereby certify that the above information is correct, and I fully understand that any deviation from the above without prior permission from the Salem Board of Health may nullify final approval. Signature(s) Owner(s) or responsible representative(s) Date: Approval of these plans and specifications by the Salem Board of Health does not indicate compliance with any other code, law, or regulation that may be required--federal, state, or local. It further does not constitute endorsement or acceptance of the completed establishment (structure or equipment). A preopening inspection of the establishment with equipment in place & operational will be necessary to determine if it complies with the local and state laws governing food service establishments.