Full Text
ROW Submittal requirements Page 1 of 2 3. TRAFFIC CONTROL PLAN - Required if impacts to pedestrian or vehicular traffic will occur Right-of-Way Use Permit Application Submittal Requirements Submit each of the numbered items below to obtain a Right‐of‐Way Use Permit (These requirements may change periodically) 1. APPLICATION Completed Right‐of‐Way Use Permit ApplicaƟon Sidewalk locaƟons ExisƟng and proposed driveways, intersecƟons and channelizaƟon ExisƟng and proposed roadway improvements including sidewalks, curb/guƩer, tapers and street lights ExisƟng right‐of‐way and easements LocaƟon and size of water faciliƟes including water meters and side sewers LocaƟon and size of sanitary sewer faciliƟes LocaƟon and size of storm water faciliƟes LocaƟon of power, power poles, gas, telephone and cable LocaƟon of fire hydrants LocaƟon of vaults LocaƟon of juncƟon boxes LocaƟon of underground duct runs 2. SITE PLAN - Include the following items Traffic Control Plans shall be submiƩed for approval with the Right‐of‐Way Use Permit ApplicaƟon. Signs, cones, barricades and all other traffic control devices to control the work area shall be used in accordance with the latest version of the “Manual on Uniform Traffic Control Devices for streets and highways (MUTCD), Part IV”. Vehicle and pedestrian access to properƟes shall be maintained at all Ɵmes and coordinated with the affected property owners. Permits will only be issued aŌer the Traffic OperaƟons Engineer has approved the Traffic Control Plan. www.redmond.gov/row ---PAGE BREAK--- ROW Submittal requirements Page 2 of 2 ELECTRONIC SUBMITTAL REQUIREMENTS Electronic plans shall meet the submiƩal requirements listed below. An incomplete applicaƟon will require revision and resubmiƩal. The required submiƩal documents must be named as follows: Right‐of‐Way Use Permit ApplicaƟon Site Plan Traffic Control Plan AddiƟonal documents such as calculaƟons, reports, photos, etc. should be named according to their content. All documents must be submiƩed in a PDF format. All site plans must be drawn to scale with the scale clearly indicated on each page. The site plans should be in landscape format. Submit the applicaƟon and all supporƟng documents to: [EMAIL REDACTED] Or City of Redmond ConstrucƟon Engineering/InspecƟon, 1NPW 15670 NE 85th Street Redmond, WA 98052 AƩn: Right‐of‐Way Program For further clarificaƟon, call 425‐556‐2723 Revision date 1/7/13 Upon review of your submiƩal, a Performance Bond may be required. Your completed applicaƟon, including all supporƟng documents will be reviewed by City staff. To track informaƟon associated to your permits or request inspecƟons, go to the E‐Track Portal. PW ConstrucƟon Engineering/InspecƟon 15670 NE 85th St, 1NPW Redmond, WA 98052 [EMAIL REDACTED] AFTER SUBMITTAL