Full Text
Ecology home > Water Quality > Aquatic Plant Management - Table of Contents > Aquatic Plant Management - Diver Dredging Aquatic Plant Management - Diver Dredging Description of Method Diver dredging (suction dredging) is a method whereby SCUBA divers use hoses attached to small dredges (often dredges used by miners for mining gold from streams) to suck plant material from the sediment. The purpose of diver dredging is to remove all parts of the plant including the roots. A good operator can accurately remove target plants, like Eurasian watermilfoil, while leaving native species untouched. The suction hose pumps the plant material and the sediments to the surface where they are deposited into a screened basket. The water and sediment are returned back to the water column (if the permit allows this) and the plant material is retained. The turbid water is generally discharged to an area curtained off from the rest of the lake by a silt curtain. The plants are disposed of on shore. Removal rates vary from approximately 0.25 acres per day to one acre per day depending on plant density, sediment type, and diver efficiency. Diver dredging is more effective where softer sediment allows easy removal of the entire plants, although water turbidity is increased with softer sediments. Harder sediment may require the use of a knife or tool to help loosen sediment from around the roots. In very hard sediments, milfoil plants tend to break off leaving the roots behind and defeating the purpose of diver dredging. Diver dredging has been used in British Columbia, Washington, and Idaho to remove early infestations of Eurasian watermilfoil. In a large scale operation in western Washington, two years of diver dredging reduced the population of milfoil by 80 percent (Silver Lake, Everett). Diver dredging is less effective on plants where seeds, turions, or tubers remain in the sediments to sprout the next growing season. For that reason, Eurasian watermilfoil is generally the target plant for removal during diver dredging operations. Advantages Diver dredging can be a very selective technique for removing pioneer colonies of Eurasian watermilfoil. • Divers can remove plants around docks and in other difficult to reach areas. • Diver dredging can be used in situations where herbicide use is not an option for aquatic plant management. • Disadvantages Diver dredging is very expensive. • Dredging stirs up sediments. This may lead to the release of nutrients or long-buried toxic materials into the water column. • Page 1 of 2 Aquatic Plant Management - Diver Dredging 6/4/2012 http://www.ecy.wa.gov/programs/wq/plants/management/dredging.html ---PAGE BREAK--- The tops of plants growing in rocky or hard sediments may removed leaving a viable root crown behind to initiate growth. • In some states, acquisition of permits can take years. • Permits Permits are required for many types of projects in lakes and streams. Diver dredging requires Hydraulic Approval from the Department of Fish and Wildlife. Diver dredging may require a Section 404 permit from the U.S. Army Corps of Engineers. Check with them before starting the project. Also check with your city or county for any local requirements before proceeding with a diver dredging project. Costs Depending on the density of the plants, specific equipment used, and disposal requirements, costs can range from a minimum of $1,500 to $2,000 per day. Questions about this page? Contact Kathy Hamel by e-mail at [EMAIL REDACTED] Copyright © Washington State Department of Ecology. See http://www.ecy.wa.gov/copyright.html. Page 2 of 2 Aquatic Plant Management - Diver Dredging 6/4/2012 http://www.ecy.wa.gov/programs/wq/plants/management/dredging.html