Full Text
DESTINATION 08 SIGN CRITERIA REVISED AUGUST 23, 2005 DAG 1 ---PAGE BREAK--- DESTINATION 08 SIGN CRITERIA REVISED AUGUST 23, 2005 DAG MAJOR TENANT WALL SIGNS TABLE OF CONTENTS 11-18 GROUND SIGNS SINGLE PAD TENANT WALL SIGNS DIRECTIONAL, PAD TENANT AND GAS MONUMENTS MULTI TENANT GROUND DISPLAYS MULTI TENANT MONUMENT SIGN MULTI TENANT FREEWAY SIGN SITE PLAN 19 21 20 22 24 23 2 Destination O8 Sign Program LANDLORD: A.C. WARNACK C/O SCOTT SMITH SCOTT SMITH REAL ESTATE 44443 TENTH STREET WEST #C LANCASTER, CA 93534 TEL (661) 945-7573 FAX (661) 945-8803 PROJECT DIRECTORY SIGN CONSULTANT: ULTRASIGNS ELECTRICAL ADVERTISING 5450 COMPLEX STREET #307 SAN DIEGO, CA 92123 TEL (858) 569-1400 X104 FAX (858) 569-1453 SIGN ADVANTAGE 20321 BIRCH STREET #200 NEWPORT BEACH, CA 92660 TEL (949) 553-2433 FAX (949) 553-2436 SUBMITTALS & APPROVALS TABLE OF CONTENTS COVER PAGE GENERAL CONSTRUCTION REQUIREMENTS SIGNAGE SPECIFICATIONS PROHIBITED SIGNS CROSS SECTIONS 3 2 1 4 5 6 7-10 ---PAGE BREAK--- DESTINATION 08 SIGN CRITERIA REVISED AUGUST 23, 2005 DAG 3 Destination O8 Sign Program A. INTRODUCTION B. GENERAL LANDLORD/TENANT REQUIREMENTS: The intent of this sign criteria is to provide the guidelines necessary to 1.Each tenant shall submit to landlord for written approval, three achieve a visually coordinated, balanced and appealing sign copies of the detailed shop drawings of this proposed sign, indicating environment, harmonious with the architecture of the project, while conformance with the sign criteria herein outlined. maintaining provisions for individual graphic expression. 2.The Landlord shall determine and approve the availability and Performance of this sign criteria shall be rigorously enforced and any position of a tenant name on any ground sign(s). nonconforming sign shall be removed by the tenant or his sign contractor at their expense, upon demand by the owner. 3.The tenant shall pay for all signs, related materials and installation fees (including final inspection costs). Exceptions to these standards shall not be permitted without approval from the Landlord and may require approval of a modification to the 4.The tenant shall obtain all necessary permits. sign program application by the city. 5.The tenant shall be responsible for fulfillment of all requirements of Accordingly, the Landlord will retain full rights of approval for any sign this sign criteria. used in the project. 6.It is the responsibility of the tenants sign company to verify all conduit No sign shall be installed without the written Landlord approval and and transformer locations and service access prior to fabrication. the required City permits. 7.Should a sign be removed, it is the tenant's responsibility to patch all holes and paint surface to match the existing color. ---PAGE BREAK--- DESTINATION 08 SIGN CRITERIA REVISED AUGUST 23, 2005 DAG 4 Destination O8 Sign Program C. GENERAL SIGN CONSTRUCTION REQUIREMENTS: 9. All lighting must match the exact specification of the approved 1. All signs and their installation shall comply with all local building and working drawings. No exposed conduits or race ways will be allowed. electrical codes. 10. Signs must be made of durable rust –inhibited materials that are 2. All electrical signs will be fabricated by a U.L. approved sign appropriate and complimentary to the building. company, according to U.L. specifications and bear U.L. Label. 11. Color coatings shall exactly match the colors specified on the 3. Sign company to be fully licensed with the City and State and shall approved plans. have full Workman's Compensation and general liability insurance. 12. Joining of materials seams) shall be finished in way as to be 4. All penetrations of building exterior surfaces are to be sealed, unnoticeable. Visible welds shall be continuous and ground smooth. waterproofed and in colors to match exterior of building. Rivets, screws, and other fasteners that extend to visible surfaces shall be flush, filled, and finished so as to be unnoticeable. 5. Internal illumination to be 30 milliamp neon, installed and labeled in accordance with the "National Board of Fire Underwriters Specifications” 13. Finished surfaces of metal shall be free from canning and warping. (except as noted otherwise). All sign finishes shall be free from dust, orange peel, drips, and runs and shall have a uniform surface conforming to the highest standards of 6. Painted surfaces to have a semi gloss finish. Only paint containing the industry. acrylic polyurethane products can be used (except as noted otherwise). 14. In no case shall any manufacturer’s label be visible from the street 7. Logo and letter heights shall be as specified and shall be determined from normal viewing angles. by measuring the normal capital letter of a type font exclusive of swashes, ascenders, and descenders. 15. Exposed raceways are only permitted if they are incorporated into the overall sign design and specifically approved by Landlord. 8. All sign fabrication work shall be of excellent quality. All logo images and type-styles shall be accurately reproduced. Lettering that 16. Exposed junction boxes, lamps, tubing, or neon crossovers of any approximates type-styles shall not be acceptable. The Owner reserves type are not permitted. the right to reject any fabrication work deemed to be below standard . ---PAGE BREAK--- DESTINATION 08 SIGN CRITERIA REVISED AUGUST 23, 2005 DAG 5 Destination O8 Sign Program D. SIGNAGE SPECIFICATIONS: The intent of this criteria is to encourage creativity to ensure the The use of dimensional and layered icons is also encouraged. individuality of each tenant sign as opposed to similar sign design, construction, and colors repeated throughout the project. Stacked copy is permitted. The following types of construction will be allowed: Ascending and descending shapes shall not be included in allocated Acrylic face channel letters square footage except for the area they occupy. Through face and halo channel letters Reverse pan channel letters Open pan channel letters Push thru letters and logos in aluminum cabinets Logo modules with applied vinyl graphics Flat cut out dimensional shapes and accents Metal screen mesh The use of at least two types of the above to be incorporated into each sign design is encouraged. The idea of using dissimilar materials and creating signs with varying colors, layers and textures will create an exciting and appealing retail environment. All tenants who have leased space adjacent to building storefront shall be allocated at least one sign for each building wall face. The length shall not exceed 75% of tenants leased premises adjacent to storefront. Each tenant shall be allocated a sign on each side of the premises that faces a street or the parking lot. Sign area available shall be calculated at two square feet of sign area for each lineal foot of leased premises in accordance with the regulations stipulated by the city’s municipal code. ---PAGE BREAK--- DESTINATION 08 SIGN CRITERIA REVISED AUGUST 23, 2005 DAG 6 Destination O8 Sign Program E. PROHIBITED SIGNS: 1. Signs constituting a Traffic Hazard 8. Light Bulb Strings: No person shall install or maintain, or cause to be installed or External displays, other than temporary decorative holiday lighting maintained, any sign which simulates or imitates in size, color, lettering which consists of unshielded light bulbs are prohibited. An exception or design any traffic sign or signal, or which makes use of the words hereto may be granted by the Landlord when the display is an integral "STOP", "LOOK", "DANGER" or any words, phrases, symbols, or part of the design character of the activity to which it relates. characters in such a manner as to interfere with, mislead or confuse traffic. 9. Banners used for advertising purposes: Temporary banners may be permitted subject to Palmdale Zoning 2. Signs in Proximity to Utility Lines: Code requirements, Landlord's, and City approval. Signs which have less horizontal or vertical clearance from authorized communication or energized electrical power lines that are prescribed 10. Billboard Signs are not permitted. by the laws of the State of California are prohibited. 11. The use of permanent sale sign is prohibited. The temporary use of 3. Painted letters will not be permitted. these signs are limited to a thirty-day period and is restricted to signs affixed to the interior of windows which do not occupy more that 20% 4. Wall signs may not project above the top of a parapet, the roof line of the window area. Each business is permitted a total of not more at the wall, roof line or attached to the building. than ninety (90) days of temporary window sale signs per calendar year. 5. There shall be no signs that are flashing, moving or audible unless approved by the landlord and city of Palmdale. F. ABANDONMENT OF SIGNS: Any tenant sign left after thirty (30) days from vacating premises shall 6. Signs must be architecturally compatible with the entire center. become the property of Landlord. 7. Vehicle Signs: Signs on or affixed to trucks, automobiles, trailers, or other vehicles which advertise, identify, or provide direction to a use or activity not related to its lawful activity are prohibited. Also, vehicle signs shall not be used as an additional advertising mechanism for tenants. ---PAGE BREAK--- DESTINATION 08 SIGN CRITERIA REVISED AUGUST 23, 2005 DAG 7 Destination O8 Sign Program EXPOSED NEON WITH ALUMINUM FACE OVERLAYS FLAT CUT OUT ALUMINUM OVERLAYS STANDARD GLASS STAND NEON TUBE FASCIA LAGS INTO EXPANSION SHIELDS SCREWS INTO PLASTIC ANCHORS METAL RACEWAY GTO-15 WIRE TRANSFORMER DISCONNECT SWITCH CONDUIT W/ GTO INSIDE P-K HOUSING SIGN TO BE UL APPROVED AND BEAR UL LABEL SECTION B TRIM-CAP STANDARD GLASS STAND NEON TUBE FACIA 1/8 X 2" LAGS INTO EXPANSION SHIELDS ALUMINUM RACEWAY GTO-15 WIRE TRANSFORMER DISCONNECT SWITCH CONDUIT W/ GTO INSIDE P-K HOUSING ACRYLIC FACE ALUMINUM CHANNEL 5” RETURNS INSTALL WITH 3 #10 SCREWS INTO PLASTIC ANCHORS LEXAN FACED CHANNEL LETTERS PK HOUSINGS WEEP HOLES SIGN TO BE UL APPROVED AND BEAR UL LABEL SECTION A SECTION A NEW SINGLE FACED INTERNALLY ILLUMINATED LEXAN FACED CHANNEL LETTER DISPLAY USE STANDARD ALUMINUM CONSTRUCTION WITH MATTHEWS (OR EQUIVALENT) SEMI GLOSS ACRYLIC POLYURETHANE FINISH, FACES USE TRANSLUCENT LEXAN WITH 3/4" TRIM CAP, ILLUMINATE WITH 30 ma NEON, PAINT RETURNS. SECTION B NEW SINGLE FACED ILLUMINATED WALL DISPLAY. USE FLAT CUT OUT .090 ALUMINUM GRAPHICS WITH NEON BEHIND, PAINT ALUMINUM MATTHEWS (OR EQUIVALENT) SEMI GLOSS ACRYLIC POLYURETHANE, USE NEON WITH PK TYPE HOUSINGS, USE STANDARD ALUMINUM CONSTRUCTION WITH MATTHEWS (OR EQUIVALENT) SEMI GLOSS ACRYLIC POLYURETHANE FINISH, (OR EQUIVALENT) SECTION E SAME AS EXCEPT ROUTE OUT WHERE GRAPHICS OCCUR AND PUSH THROUGH 1/2” CLEAR PLEX WITH APPLIED VINYL OVERLAYS, NOTE: ALL SIGNS MAY UTILIZE DIGITAL VINYL PRINTING ON FACES OF ILLUMINATED OR NON ILLUMINATED SURFACES. SECTION C NEW SINGLE FACED INTERNALLY ILLUMINATED LEXAN FACED CHANNEL LETTER DISPLAY WITH THROUGH FACE AND HALO ILLUMINATION. FACES USE LEXAN WITH 3/4" TRIM CAP, ILLUMINATE WITH 30 ma NEON THROUGH FACE AND HALO, PAINT RETURNS. SECTION D NEW SINGLE FACED INTERNALLY ILLUMINATED ALUMINUM FACED CHANNEL LETTER DISPLAY WITH THROUGH FACE AND HALO ILLUMINATION. USE STANDARD ALUMINUM CONSTRUCTION WITH MATTHEWS SEMI GLOSS ACRYLIC POLYURETHANE FINISH, ROUTE OUT WHERE GRAPHICS OCCUR AND BACK UP WITH LEXAN, ILLUMINATE WITH 30 ma NEON THROUGH FACE AND HALO, PAINT ALUMINUM FACE AND RETURNS. NEON TUBE CLEAR LEXAN BACKS LEXAN FACES FACIA 1/8 X 2" LAGS INTO EXPANSION SHIELDS ALUMINUM RACEWAY GTO-15 WIRE TRANSFORMER DISCONNECT SWITCH ELECTROBITS 3/4" CONDUIT THRU WALL LEXAN FACED CHANNEL LETTERS THROUGH FACE AND HALO ILLUMINATION ALUMINUM CHANNEL TRIM CAP 4” RETURNS 1-3/8” PEG OFF WALL INSTALL WITH 3 1/8" X 3-1/2" SCREWS INTO PLASTIC ANCHORS WEEP HOLES SIGN TO BE UL APPROVED AND BEAR UL LABEL SECTION C NEON TUBE CLEAR LEXAN BACKS LEXAN BACKUP FACIA 1/8 X 2" LAGS INTO EXPANSION SHIELDS ALUMINUM RACEWAY GTO-15 WIRE TRANSFORMER DISCONNECT SWITCH ELECTROBITS 3/4" CONDUIT THRU WALL ALUMINUM CHANNEL 4” RETURNS 1-3/8” PEG OFF WALL INSTALL WITH 3- 1/8" X 3-1/2" SCREWS INTO EXPANSION SHIELDS (EACH LETTER) REVERSE PAN CHANNELS THROUGH FACE AND HALO ILLUMINATION WEEP HOLES SIGN TO BE UL APPROVED AND BEAR UL LABEL SECTION D NEON TUBE CLEAR LEXAN BACKS LEXAN BACKUP 1/2” CLEAR PLEX PUSH THROUGH FACIA 1/8 X 2" LAGS INTO EXPANSION SHIELDS ALUMINUM RACEWAY GTO-15 WIRE TRANSFORMER DISCONNECT SWITCH ELECTROBITS 3/4" CONDUIT THRU WALL ALUMINUM CHANNEL 4” RETURNS 1-3/8” PEG OFF WALL INSTALL WITH 3- 1/8" X 3-1/2" SCREWS INTO EXPANSION SHIELDS (EACH LETTER) REVERSE PAN CHANNELS THROUGH FACE AND HALO ILLUMINATION PUSH THROUGH GRAPHICS WEEP HOLES SIGN TO BE UL APPROVED AND BEAR UL LABEL SECTION E ---PAGE BREAK--- DESTINATION 08 SIGN CRITERIA REVISED AUGUST 23, 2005 DAG Non-illuminated Signage Detail Building Fascia Oversized Hole Filled w/ Silicone Adhesive Split Face Block Typ. 3/16” Threaded Stud Plastic Formed Letter Attachment Detail NTS Illuminated Signage Detail Painted .071 alum. sign return Anchor bolt/bracket - size is submitted to jurisdiction for approval Fluorescent light ballast furnished by sign shop. Flex conduit supplied in letter, stubbed through and caulked by sign installer 4” x 4” junction box supplied and installed by G.C.’s electrician. Fluorescent tubing mounted on alum. Wiring track (all enclosed wiring) Red or white acrylic formed sign face Painted alum. facial extrusion return Sealant all sides *NOTE: MAJOR RETAIL 1 RESERVES THE RIGHT TO REPLACE THE FLUORESCENT TUBING WITH LED. MAJOR RETAIL 1 - SIGNAGE DETAILS Illuminated Sign Configuration: Channel letters with vacuum formed face (pan- formed) anchored to building surface (concrete block or plaster). Internally illuminated with fluorescent tube or LED. Face: Constructed with Sunguard Weatherable Polycarbonate Color: High Performance White / Red PMS 3630-73 Mounting: Anchor bolt/bracket - size to be submitted to jurisdiction for approval prior to installation. Minimum 3 anchors per sign. Non-Illuminated Sign Configuration: Plastic formed letters stud mounted to building surface (concrete block or plaster). Face: Constructed with Sta-Tuf Plastic Color: High Performance White / Red PMS 3630-73 / Yellow 108 Mounting: Threaded stud - size to be submitted to jurisdiction for approval prior to installation. Minimum 3 studs per sign. 8 Destination O8 Sign Program ---PAGE BREAK--- DESTINATION 08 SIGN CRITERIA REVISED AUGUST 23, 2005 DAG 9 Destination O8 Sign Program Illuminated Signage Detail Externally Illuminated Signage Detail MAJOR RETAIL 2 - SIGNAGE DETAILS ---PAGE BREAK--- DESTINATION 08 SIGN CRITERIA REVISED AUGUST 23, 2005 DAG FUELING STATION - SIGNAGE DETAILS 10 Destination O8 Sign Program ---PAGE BREAK--- DESTINATION 08 SIGN CRITERIA REVISED AUGUST 23, 2005 DAG 11 Destination O8 Sign Program Illuminated Sign Non-Illuminated Sign Configuration: Channel letters with vacuum formed face (pan- formed) anchored to building surface (concrete block or plaster). Internally illuminated with fluorescent tube or LED. Face: Constructed with Sunguard Weatherable Polycarbonate Color: High Performance White / Red PMS 3630-73 Mounting: Anchor bolt/bracket - size to be submitted to jurisdiction for approval prior to installation. Minimum 3 anchors per sign. Configuration: Plastic formed letters stud mounted to building surface (concrete block or plaster). Face: Constructed with Sta-Tuf Plastic Color: High Performance White / Red PMS 3630-73 / Yellow 108 Mounting: Threaded stud - size to be submitted to jurisdiction for approval prior to installation. Minimum 3 studs per sign. - WEST ELEVATION MAJOR RETAIL 1 Total Sign Area Provided: West Elevation: 937.08 SF - Illuminated Signs - Non-Illuminated Signs * Signage square footage for signs with multiple lines was calculated per Palmdale’s Zoning Ordinance: Chapter 8, Article 88, Section 88.03 Sign N Sign I Sign H Sign C Sign G Sign A Sign B Sign D Sign M Sign K Sign L Sign O Sign P Sign C Sign J Sign F Sign E Total Sign Area (all elevations): 1,159.37 SF Sign Sign A Sign B Sign C Sign D Sign E Sign F Sign G Sign H *Sign I Sign Sign J Sign K Sign L Sign M Sign N Sign O Sign P Sign Q (not shown) Dimensions 5’-0” x 38’-0” 2’-0” x 19’-6” 8’-11” x 16’-4” 2’-6” x 20’-2” 2’-6” x 21’-9 3/4” 1’-6” x 11’-0” 1’-6” x 9’-8 1/2” 1’-6” x 6’-10 1/8” 6’-0” x 19’-1” Dimensions 1’-6” x 6’-10” 1’-6” x 3’-6 3/8” 1’-6” x 4’-6 3/4” 1’-6” x 7’-11” 2’-6” x 23’-11 5/8” 1’-6” x 20’-8” 1’-0” x 2’-5” 2’-9” x 5’-3 3/8” Total 190.00 SF 39.00 SF 291.28 SF 50.42 SF 54.53 SF 16.50 SF 14.56 SF 10.26 SF 114.50 SF Total 10.25 SF 5.30 SF 6.84 SF 11.88 SF 59.90 SF 31.00 SF 4.84 SF 29.04 SF ---PAGE BREAK--- DESTINATION 08 SIGN CRITERIA REVISED AUGUST 23, 2005 DAG Illuminated Sign Non-Illuminated Sign Configuration: Channel letters with vacuum formed face (pan- formed) anchored to building surface (concrete block or plaster). Internally illuminated with fluorescent tube or LED. Face: Constructed with Sunguard Weatherable Polycarbonate Color: High Performance White / Red PMS 3630-73 Mounting: Anchor bolt/bracket - size to be submitted to jurisdiction for approval prior to installation. Minimum 3 anchors per sign. Configuration: Plastic formed letters stud mounted to building surface (concrete block or plaster). Face: Constructed with Sta-Tuf Plastic Color: High Performance White / Red PMS 3630-73 / Yellow 108 Mounting: Threaded stud - size to be submitted to jurisdiction for approval prior to installation. Minimum 3 studs per sign. 12 Destination O8 Sign Program - EAST ELEVATION MAJOR RETAIL 1 Total Sign Area Provided: East Elevation: 8.31 SF Sign R Sign S - Illuminated Signs - Non-Illuminated Signs * Signage square footage for signs with multiple lines was calculated per Palmdale’s Zoning Ordinance: Chapter 8, Article 88, Section 88.03 Sign Sign R Sign Sign S Dimensions 1’-0” x 4’-0 3/4” Dimensions 1’-0” x 4’-3” Total 4.06 SF Total 4.25 SF ---PAGE BREAK--- DESTINATION 08 SIGN CRITERIA REVISED AUGUST 23, 2005 DAG Illuminated Sign Non-Illuminated Sign Configuration: Channel letters with vacuum formed face (pan- formed) anchored to building surface (concrete block or plaster). Internally illuminated with fluorescent tube or LED. Face: Constructed with Sunguard Weatherable Polycarbonate Color: High Performance White / Red PMS 3630-73 Mounting: Anchor bolt/bracket - size to be submitted to jurisdiction for approval prior to installation. Minimum 3 anchors per sign. Configuration: Plastic formed letters stud mounted to building surface (concrete block or plaster). Face: Constructed with Sta-Tuf Plastic Color: High Performance White / Red PMS 3630-73 / Yellow 108 Mounting: Threaded stud - size to be submitted to jurisdiction for approval prior to installation. Minimum 3 studs per sign. 13 Destination O8 Sign Program MAJOR RETAIL 1 - NORTH ELEVATION - Illuminated Signs - Non-Illuminated Signs * Signage square footage for signs with multiple lines was calculated per Palmdale’s Zoning Ordinance: Chapter 8, Article 88, Section 88.03 Sign Sign T Sign U Sign *Sign V Dimensions 1’-0” x 8’-11 1/2” 1’-0” x 3’-3 1/8” Dimensions 6’-10” x 15’-10 1/2” Total 26.88 SF 9.78 SF Total 95.10 SF Sign T Sign U Sign V Total Sign Area Provided: North Elevation: 131.76 SF ---PAGE BREAK--- DESTINATION 08 SIGN CRITERIA REVISED AUGUST 23, 2005 DAG Illuminated Sign Non-Illuminated Sign Configuration: Channel letters with vacuum formed face (pan- formed) anchored to building surface (concrete block or plaster). Internally illuminated with fluorescent tube or LED. Face: Constructed with Sunguard Weatherable Polycarbonate Color: High Performance White / Red PMS 3630-73 Mounting: Anchor bolt/bracket - size to be submitted to jurisdiction for approval prior to installation. Minimum 3 anchors per sign. Configuration: Plastic formed letters stud mounted to building surface (concrete block or plaster). Face: Constructed with Sta-Tuf Plastic Color: High Performance White / Red PMS 3630-73 / Yellow 108 Mounting: Threaded stud - size to be submitted to jurisdiction for approval prior to installation. Minimum 3 studs per sign. 14 Destination O8 Sign Program MAJOR RETAIL 1 - SOUTH ELEVATION - Illuminated Signs - Non-Illuminated Signs * Signage square footage for signs with multiple lines was calculated per Palmdale’s Zoning Ordinance: Chapter 8, Article 88, Section 88.03 Sign Sign W Sign Sign X Dimensions 2’-6” x 19’-3 3/8” Dimensions 1’-6” x 20’-8” Total 48.20 SF Total 31.00 SF Sign X Sign W Total Sign Area Provided: South Elevation: 79.20 SF ---PAGE BREAK--- DESTINATION 08 SIGN CRITERIA REVISED AUGUST 23, 2005 DAG Illuminated Sign Non-Illuminated Sign Configuration: Vacuum formed face (pan-formed) anchored to building surface (concrete block or plaster). Internally illuminated with fluorescent tube. Face: Constructed with Sunguard Weatherable Polycarbonate Color: White High Performance / Orange PMS 166 Mounting: Anchor bolt/bracket - size to be submitted to jurisdiction for approval prior to installation. Minimum 3 anchors per sign. Configuration: Plastic formed letters stud mounted to building surface (concrete block or plaster). Face: Constructed with Sta-Tuf Plastic Color: Mounting: Threaded stud - size to be submitted to jurisdiction for approval prior to installation. Minimum 3 studs per sign. Total Sign Area Provided: West Elevation: 400.56 SF Total Sign Area (all elevations): 599.05 SF 15 Destination O8 Sign Program - WEST ELEVATION MAJOR RETAIL 2 Green PMS 583 / Blue PMS 286 White High Performance / Orange PMS 166 Green PMS 583 / Blue PMS 286 Sign Dimensions Total Sign Dimensions Total Sign A 18’-11 3/8” x 14’-1 3/4” 18’-11 3/8” x 14’-1 3/4” 155.84 SF 155.84 SF 62.00 SF 1’-6” x 8’-4” 12.50 SF Sign B Sign C Sign E Sign F Sign D 10’- 3/8” x 10’-3/8” 1’-6” x 3’-6” 1’-6” x 6’-1” 5.25 x = 10.50 SF 9.13 SF Illuminated Signs Non-Illuminated Signs Externally Illuminated Signs * Reference external illuminated detail. ---PAGE BREAK--- DESTINATION 08 SIGN CRITERIA REVISED AUGUST 23, 2005 DAG 16 Destination O8 Sign Program Illuminated Sign Non-Illuminated Sign Configuration: Vacuum formed face (pan-formed) anchored to building surface (concrete block or plaster). Internally illuminated with fluorescent tube. Face: Constructed with Sunguard Weatherable Polycarbonate Color: White High Performance / Orange PMS 166 Mounting: Anchor bolt/bracket - size to be submitted to jurisdiction for approval prior to installation. Minimum 3 anchors per sign. Configuration: Plastic formed letters stud mounted to building surface (concrete block or plaster). Face: Constructed with Sta-Tuf Plastic Color: Mounting: Threaded stud - size to be submitted to jurisdiction for approval prior to installation. Minimum 3 studs per sign. - NORTH ELEVATION MAJOR RETAIL 2 Green PMS 583 / Blue PMS 286 White High Performance / Orange PMS 166 Green PMS 583 / Blue PMS 286 Sign Dimensions Total Sign G 18’-11 3/8” x 14’-1 3/4” 155.84 SF Illuminated Signs Non-Illuminated Signs Externally Illuminated Signs * Reference external illuminated detail. Total Sign Area Provided: North Elevation: 155.84 SF Total Sign Area (all elevations): 599.05 SF ---PAGE BREAK--- DESTINATION 08 SIGN CRITERIA REVISED AUGUST 23, 2005 DAG Illuminated Sign Non-Illuminated Sign Configuration: Vacuum formed face (pan-formed) anchored to building surface (concrete block or plaster). Internally illuminated with fluorescent tube. Face: Constructed with Sunguard Weatherable Polycarbonate Color: White High Performance / Orange PMS 166 Mounting: Anchor bolt/bracket - size to be submitted to jurisdiction for approval prior to installation. Minimum 3 anchors per sign. Configuration: Plastic formed letters stud mounted to building surface (concrete block or plaster). Face: Constructed with Sta-Tuf Plastic Color: Mounting: Threaded stud - size to be submitted to jurisdiction for approval prior to installation. Minimum 3 studs per sign. Total Sign Area Provided: East Elevation: 37.38 SF Total Sign Area (all elevations): 599.05 SF - EAST ELEVATION MAJOR RETAIL 2 Green PMS 583 / Blue PMS 286 White High Performance / Orange PMS 166 Green PMS 583 / Blue PMS 286 Sign Dimensions Total Sign H 1’-6” x 24’-11” 37.38 SF Illuminated Signs Non-Illuminated Signs Externally Illuminated Signs 17 Destination O8 Sign Program ---PAGE BREAK--- DESTINATION 08 SIGN CRITERIA REVISED AUGUST 23, 2005 DAG Configuration: Internally illuminated sign box logo/letters mounted to building surface (concrete block or plaster). Vacuum formed acrylic sign. Total Sign Area: 119.16 SF East and West Elevations: 60.00 SF North and South Elevations: 59.16 SF Lighting: Internally illuminated letters and/or cabinet 18 Destination O8 Sign Program FUELING STATION Sign Dimensions Total Sign Dimensions Total Sign A 2’-0” x 15’-0” 1’-6” x 12’-6” 30.00 x = 60.00 SF 18.75 X = 37.5 SF 2’-9” x 3’-11 1/4” 10.83 x = 21.66 SF Sign B Sign C Illuminated Signs - ELEVATION ---PAGE BREAK--- DESTINATION 08 SIGN CRITERIA REVISED AUGUST 23, 2005 DAG 19 TENANT TENANT Destination O8 Sign Program TYPICAL SINGLE PAD TENANT ELEVATION SINGLE PAD TENANT SINGLE PAD TENANT SINGLE PAD TENANT SINGLE PAD TENANT MAXIMUM 70 % OF FASCIA HEIGHT SIGN AREA TO BE CALCULATED AT 2 SQUARE FEET OF SIGN PER LINEAL FOOT OF LEASED PREMISES. MAXIMUM 75 PERCENT OF FASCIA LENGTH ---PAGE BREAK--- DESTINATION 08 SIGN CRITERIA REVISED AUGUST 23, 2005 DAG 20 Destination O-Eight Sign Program SIGN A1 A2 15’-6” MULTI TENANT GROUND SIGN SCALE 3/16”=1’-0” NEW DOUBLE FACED ILLUMINATED GROUND DISPLAY (MAKE TWO) USE STANDARD ALUMINUM CONSTRUCTION WITH ANGLE FRAME AND STEEL PIPE SUPPORT INTO CEMENT FOOTING, SEE ENGINEERS SPECS FOR STRUCTURAL CALCULATIONS, SIGN TO BE UL APPROVED AND BEAR UL LABEL, VERIFY EXACT LOCATION OF SIGN PRIOR TO INSTALLATION. 8’-6” 4’-3” 4’-3” 2’-4” 2’-4” 2’-4” 1’-1 3/4” 2’-4” 2’-4” 2’-4” 30’-0” ALUMINUM SIGN CABINET WITH ROUTED AND BACKED UP PLEX GRAPHICS. SIGN CABINET PAINTED BURGUNDY AKZO NOBEL 404F5 OR TO MATCH PMS 188C BURGUNDY. WHITE BACKED UP PLEX GRAPHICS. ALUMINUM STRUCTURE WITH STO FINISH BASE WITH STONE FINISH TO MATCH BUILDING PLEX FACED ALUMINUM CHANNEL LETTERS. SHERWIN WILLIAMS HARVESTER #Sw6373 SHERWIN WILLIAMS PRIVLEDGE GREEN #6193 EL DORADO LEDGESTONE FRAZEE #7816N TASMANIAN FRAZEE LIKEABLE SAND #6058 FRAZEE MOCHA #6067 ---PAGE BREAK--- DESTINATION 08 SIGN CRITERIA REVISED AUGUST 23, 2005 DAG 21 Destination O8 Sign Program EACH MONUMENT LOCATION 8’-1” 8'-0 " 1’-0 " 5’-2” TENANT TENANT TENANT TENANT SIGN SIGN SIGN C1 C6 D C2 C7 C3 C8 C4 C9 C5 B SINGLE PAD TENANT MONUMENT SIGN SCALE 1/4”=1’-0” GAS STATION MONUMENT SIGN SCALE 1/4”=1’-0” DIRECTIONAL MONUMENT SIGN SCALE 1/4”=1’-0” NEW DOUBLE FACED ILLUMINATED GROUND DISPLAYS, USE STANDARD ALUMINUM CONSTRUCTION WITH ANGLE FRAME AND STEEL PIPE SUPPORT INTO CEMENT FOOTING, SEE ENGINEERS SPECS FOR STRUCTURAL CALCULATIONS, SIGN TO BE UL APPROVED AND BEAR UL LABEL, VERIFY EXACT LOCATION OF SIGN PRIOR TO INSTALLATION. NEW DOUBLE FACED ILLUMINATED GROUND DISPLAYS, USE STANDARD ALUMINUM CONSTRUCTION WITH ANGLE FRAME AND STEEL PIPE SUPPORT INTO CEMENT FOOTING, SEE ENGINEERS SPECS FOR STRUCTURAL CALCULATIONS, SIGN TO BE UL APPROVED AND BEAR UL LABEL, VERIFY EXACT LOCATION OF SIGN PRIOR TO INSTALLATION. NEW DOUBLE FACED NON-ILLUMINATED GROUND DISPLAY, USE STANDARD ALUMINUM CONSTRUCTION WITH ANGLE FRAME AND STEEL PIPE SUPPORT INTO CEMENT FOOTING, SEE ENGINEERS SPECS FOR STRUCTURAL CALCULATIONS, VERIFY EXACT LOCATION OF SIGN PRIOR TO INSTALLATION. 10'-9” 8'-0 " 2’-8” 7’-10” PAD TENANT 10'-9” 8'-0 " 2’-8” 7’-10” 5 5 5 5 9 9 9 9 10 10 10 10 3 3 3 3 1. 1. 1. 1. Regular Plus Super Diesel #2 GAS STATION ALUMINUM SIGN CABINET WITH ROUTED AND BACKED UP PLEX GRAPHICS. ALUMINUM STRUCTURE WITH STO FINISH BASE WITH STONE FINISH TO MATCH BUILDING PLEX FACED ALUMINUM CHANNEL LETTERS. SHERWIN WILLIAMS HARVESTER #Sw6373 SHERWIN WILLIAMS PRIVLEDGE GREEN #6193 EL DORADO LEDGESTONE FRAZEE #7816N TASMANIAN FRAZEE LIKEABLE SAND #6058 FRAZEE MOCHA #6067 ---PAGE BREAK--- DESTINATION 08 SIGN CRITERIA REVISED AUGUST 23, 2005 DAG O SIGN E1 E2 MULTI TENANT MONUMENT SIGN SCALE 3/8”=1’-0” NEW DOUBLE FACED ILLUMINATED GROUND DISPLAYS, USE STANDARD ALUMINUM CONSTRUCTION WITH ANGLE FRAME AND STEEL PIPE SUPPORT INTO CEMENT FOOTING, SEE ENGINEERS SPECS FOR STRUCTURAL CALCULATIONS, SIGN TO BE UL APPROVED AND BEAR UL LABEL, VERIFY EXACT LOCATION OF SIGN PRIOR TO INSTALLATION. 10'-9” 9’-0” 3’-3” 1’-7 1/2” 1’-7 1/2” 7’-10” TENANT TENANT TENANT TENANT ALUMINUM SIGN CABINET WITH ROUTED AND BACKED UP PLEX GRAPHICS. ALUMINUM STRUCTURE WITH STO FINISH BASE WITH STONE FINISH TO MATCH BUILDING PLEX FACED ALUMINUM CHANNEL LETTERS. SHERWIN WILLIAMS HARVESTER #Sw6373 SHERWIN WILLIAMS PRIVLEDGE GREEN #6193 EL DORADO LEDGESTONE FRAZEE #7816N TASMANIAN FRAZEE LIKEABLE SAND #6058 FRAZEE MOCHA #6067 Destination O8 Sign Program 22 ---PAGE BREAK--- DESTINATION 08 SIGN CRITERIA REVISED AUGUST 23, 2005 DAG 23 Destination O-Eight Sign Program TENANT TENANT TENANT TENANT TENANT TENANT SIGN F 25’-8 1/2” MULTI TENANT FREEWAY SIGN SCALE 1/8”=1’-0” NEW DOUBLE FACED ILLUMINATED FREEWAY DISPLAY USE STANDARD ALUMINUM CONSTRUCTION WITH ANGLE FRAME AND STEEL PIPE SUPPORT INTO CEMENT FOOTING, SEE ENGINEERS SPECS FOR STRUCTURAL CALCULATIONS, SIGN TO BE UL APPROVED AND BEAR UL LABEL, VERIFY EXACT LOCATION OF SIGN PRIOR TO INSTALLATION. 60’-0” 16'-4 1/2" 4'-6 " 4'-6 " 4'-6 " 4'-6 " 4'-6 " 2’-2 5/8” 4'-6 " 8'-2 1/4" 8'-2 1/4" SHERWIN WILLIAMS HARVESTER #Sw6373 SHERWIN WILLIAMS PRIVLEDGE GREEN #6193 EL DORADO LEDGESTONE FRAZEE #7816N TASMANIAN FRAZEE LIKEABLE SAND #6058 FRAZEE MOCHA #6067 ALUMINUM STRUCTURE WITH STO FINISH BASE WITH STONE FINISH TO MATCH BUILDING PLEX FACED ALUMINUM CHANNEL LETTERS. ALUMINUM SIGN CABINET WITH ROUTED AND BACKED UP PLEX GRAPHICS. SIGN CABINET PAINTED BURGUNDY AKZO NOBEL 404F5 OR TO MATCH PMS 188C BURGUNDY. WHITE BACKED UP PLEX GRAPHICS.