Full Text
Page 1 of 31 ORDINANCE NO. 11-09 AN ORDINANCE ENACTING CHAPTER 17.170 OF THE MURRAY CITY MUNICIPAL CODE RELATING TO A CITY CENTER DISTRICT. BE IT ENACTED BY THE MURRAY CITY MUNICIPAL COUNCIL: Section 1. Purpose. The purpose of this ordinance is to enact Chapter 17.170 of the Murray City Municipal Code relating to a City Center District. Section 2. Enactment of Chapter 17.170 of the Murray City Municipal Code. Chapter 17.170 of the Murray City Municipal Code shall be enacted to read as follows: Chapter 17.170 MURRAY CITY CENTER DISTRICT (MCCD) 17.170.010: Purpose 17.170.020: Boundaries 17.170.030: Municipal Council Adoption of City Center District Design Guidelines 17.170.040: Definitions 17.170.050: Design Review Process 17.170.060: Hearing Procedures 17.170.070: Historic Preservation 17.170.080: Uses 17.170.090: Sustainability Standards 17.170.100: Area, Width, Frontage and Yard Regulations 17.170.110: Building Design and Scaling 17.170.120: Height Regulations 17.170.130: Lighting 17.170.140: Parking Regulations 17.170.150: Loading and Service Areas 17.170.160: Open Space and Landscape Requirements 17.170.170: Access Improvements and Street Character 17.170.180: Sign Regulations 17.170.190: Violation and Penalty 17.170.010: PURPOSE: The Murray City Center District (MCCD) is envisioned as the commercial, civic and cultural center for the community and is a new mixed-use district intended to enhance physical, social and economic connections by redeveloping “Downtown” Murray City resulting in a richer, more vibrant cultural environment. This District applies similar ---PAGE BREAK--- Page 2 of 31 characteristics to those found in the transit oriented development district (TOD – Chapter 17.168) by encouraging pedestrian oriented design, promoting development opportunities, and increasing residential and commercial densities. The anticipated development model promotes sustainable, compact, mixed-use, transit oriented uses with neighborhood oriented commercial, restaurant, civic, cultural and residential spaces to promote street life and activity by regulating building orientation and design. The City's downtown general plan element notes that historic downtown is a valuable community asset. The City's historic downtown includes live theater, social dancing, music stores, photography, dance studios, and other contributing businesses. The City hall, Murray park amenities, Boys and Girls Club of South Valley, Ken Price ballpark, and City library are located in or border the historic downtown area. The downtown general plan element suggests "these uses can form the entertainment, cultural, and civic area". The general plan suggests preserving historic buildings and character, urban design and appearance of the area including streetscape, compatibility of land uses and the need for buffers and transition areas, development of downtown economic niches, and new business opportunities, and parking. The historic advisory board has recommended inclusion of historic buildings into a designated area of the downtown. The designation of historic buildings was previously part of the Downtown Historic Overlay District (DHOD). Adoption of the MCCD eliminates the DHOD but will still maintain a historic preservation element. Development Goals and Objectives for the area include: 1. Enhance the integrity of Murray City; Maintain the historic fabric Create a true downtown/civic center Create synergy with the hospital and transportation opportunities 2. Create a vibrant neighborhood; Create a place to live, work and play Provide a mix of quality housing Provide neighborhood services and entertainment including smaller local restaurants, coffee shops and destination-oriented entertainment 3. Provide attractive and compatible architecture and streetscape; Focus on the pedestrian experience Buffer the parking Enhance green corridors and trail connections 4. Capitalize on transit opportunities; Promote alternate modes of transportation including rail, bicycle, and walking ---PAGE BREAK--- Page 3 of 31 Provide access and connections including TRAX, Frontrunner, Interstate-15, Interstate -215 5. Increase opportunities for growth; Evolve over time Make the City center self sufficient Keep people in Murray 6. Set a standard for sustainability; Adopt standards that promote sustainability while maintaining affordability Design standards including required development processes, development goals and objectives, sustainability, neighborhood, site, and building standards are outlined in the Murray City Center District Design Guidelines. All development within the MCCD is facilitated by the standards and guidelines in this document. 17.170.020: BOUNDARIES: The Murray City Center District comprises approximately 97 acres of properties and right-of-way located generally between the Trax rail lines to the west, Center Street and Jones Court on the east, 4800 South Street and several additional properties north of 4800 South, and Little Cottonwood Creek to the South as described in the legal description adopted with this ordinance. 17.170.030: MURRAY CITY MUNICIPAL COUNCIL ADOPTION OF CITY CENTER DISTRICT DESIGN GUIDELINES; CONFORMANCE WITH GUIDELINES: The Murray City Municipal Council shall adopt the Murray City Center District (MCCD) Design Guidelines. Property located within the MCCD shall be developed in conformance with the provisions set forth in this chapter and with the MCCD Guidelines. 17.170.040: DEFINITIONS: ADMINISTRATIVE STAFF: Representatives from the Community and Economic Development staff. CERTIFICATE OF APPROPRIATENESS: A certificate issued by the City’s planning commission indicating its approval of plans for alteration, construction, removal, restoration, or demolition of a building or development of a site. DESIGN GUIDELINES: The standards of appropriate development activity that adheres to the purposes and standards of the zoning ordinance. DESIGN REVIEW COMMITTEE OR COMMITTEE: The committee established under title 2, Chapter 2.68 of this code. This committee acts in an advisory capacity to the City ---PAGE BREAK--- Page 4 of 31 planning commission and to the Murray City Municipal Council and serves to facilitate the design review process. DESIGN REVIEW PROCESS: The review of an application undertaken by the design review committee using standards defined by the City's design guidelines and, in the case of significant historic buildings, the secretary of the interior standards for rehabilitation of historic buildings. The process includes a conference between the design review committee and the applicant. The committee recommends approval or disapproval of the application and outlines its recommendation in a report that accompanies the referral of the application to the City planning commission. LEED: Leadership in Energy and Environmental Design. It is a rating system published by the US Green Building Council that encourages and accelerates global adoption of sustainable green building and development practices through the creation and implementation of universally understood and accepted tools, design criteria, and building and systems performance criteria. LEED certification requires third party review and verification of compliance with required criteria by an individual certified by the Green Building Certification Institute. LEED-ND (Neighborhood Design): sustainable standard published by the US Green Building Council which recognizes development projects that successfully protect and enhance the overall health, natural environment, and quality of life. The rating system encourages best development practices, promoting the location and design of neighborhoods. It promotes more efficient energy and water use, especially important in urban areas. MAJOR ALTERATION: A physical modification to a building that involves the entire building or has a substantial visual impact on the building or the surroundings. By way of illustration, major alteration includes, without limitation, overall building design, exterior facades, site landscape and parking. MINOR ALTERATION: A physical modification that is limited in scope or has a minor visual impact in relation to the total building. By way of illustration, minor alteration includes, without limitation, lighting and other appurtenant fixtures, signs and awnings. ORDINARY MAINTENANCE AND REPAIR: Work to repair or prevent deterioration of a building that does not constitute a minor or major alteration. Examples of ordinary maintenance and repair include repairing deteriorated masonry, replacing broken windows or damage caused by weather or natural disaster, repainting a building in the same color as existing, replacing doors and etc. Maintenance and repair does not include major changes in color or building materials. PLANNING AND ZONING COMMISSION OR COMMISSION: The City's Planning and Zoning Commission. ---PAGE BREAK--- Page 5 of 31 SUSTAINABLE DESIGN: Sustainable design includes methods and materials that conserve natural resources, promote adaptive reuse of materials, buildings and sites, and promote the health and welfare of residents and property owners. 17.170.050: DESIGN REVIEW PROCESS: A. Certificate of Appropriateness: The purpose and intent of the certificate of appropriateness review within the MCCD is to secure the purposes of this chapter and the general plan and to ensure that the general appearance of buildings, signs, and the development of the lands shall not detract from the purposes and intent set forth in this chapter. B. Certificate of Appropriateness Required: No exterior portion of any buildings or improvements on any properties shall be erected, altered, restored, moved or demolished within the MCCD, until after an application for a certificate of appropriateness has been submitted, reviewed, and approved. Application for certificate of appropriateness shall be made on forms furnished by the City's Community and Economic Development Department. The Director shall determine if the application is a major or minor alteration. The determination of the director may be appealed to the Board of Adjustments. 1. Minor Alterations: Administrative staff shall review and approve applications for minor alterations, signs, awnings, and lighting. Minor alterations denied by the administrative staff may be appealed to the board of adjustment. A certificate of appropriateness application, when determined to involve signs, awnings, lighting, or minor alterations may be reviewed and approved by administrative staff. A certificate of appropriateness for minor alterations must be approved or denied within thirty (30) days from receipt of a complete application. 2. Major Alterations and New Construction: A design review process consisting of the following: a. Pre Application Conference: Application materials will be submitted to the Community and Economic Development Department and a time will be scheduled for a general concept review of the application. The applicant will receive input from staff on the process, design standards and other applicable elements prior to submittal of a final application. b. Design Review: After the application for formal review is submitted, meetings will be scheduled for site plan review to gain City department input on the plans. A conference(s) between the MCCD Design Review Committee and the applicant shall be required for all applications for major alterations and new construction to review the proposal in relation to this chapter and design review guidelines. The application will then be forwarded to the planning commission for final ---PAGE BREAK--- Page 6 of 31 action. The application shall be made on a form available from the Community and Economic Development Department and shall include minimum application submittal requirements as determined by the Community and Economic Development Department. c. Certificate of Appropriateness Issuance: A certificate of appropriateness shall be issued by the planning commission prior to the issuance of a building permit or other permit granted for purposes of major alterations including constructing, altering, moving or demolishing structures and buildings. A certificate of appropriateness shall be required whether or not a building permit is required. Therefore, a certificate of appropriateness is a prerequisite to the issuance of such a building permit or such other permits. The planning commission shall review the plans for conformance with the requirements of this title and the MCCD design guidelines that have been adopted by the Murray City Council. The City shall determine the following before approval is given: i. The project is in general conformance with the Murray City General Plan. ii. The project is in general conformance with the specific area plan, if any, adopted for the area. iii. The project conforms to the requirements of the applicable sections of the land use ordinance. iv. The project does not jeopardize the health, safety, or welfare of the public. v. The project conforms to the applicable standards outlined in the MCCD design review guidelines. d. Obtaining a Building Permit: No person shall obtain a building permit for new construction or for renovation of existing buildings without first preparing and presenting the information required by this section, paying the applicable design review fees, and receiving design approval from the Community and Economic Development Department. Any building permits or such other permits not issued in conformity with this chapter shall be invalid. e. Public Utility Companies: The State of Utah, the City, Salt Lake County, and all public utility companies shall be required to obtain a certificate of appropriateness prior to initiating any changes in the character of street paving, sidewalks, utility installations, lighting, walls, fences, structures and buildings. ---PAGE BREAK--- Page 7 of 31 f. Design Elements Subject to Review to Determine Appropriateness: i. Overall building design including design character, alignment and setback, size, height, proportion, and scale of the building; ii. Compatibility with adjacent significant historic buildings; iii. Exterior facades including exterior walls and building materials, roof and parapet, storefronts including windows and doors, bulkheads, cornices, ornamental detail, color, and back entrances; iv. Site landscape including pavement, steps, lighting, trees, and ground cover. v. Parking; vi. Lighting and other appurtenant fixtures; vii. Signs and awnings. g. Exceptions: Even if all design guidelines are not met, a certificate of appropriateness may be issued after it is determined that compliance with the design guidelines or certain design guidelines would: a) deprive owner of all viable economic use of the owner's property, or b) result in substantial diminution in value of owner's property. C. Certificate of Appropriateness Compliance: 1. All work performed pursuant to an issued certificate of appropriateness shall conform to the requirements of such certificate. 2. Upon receiving a written complaint alleging a violation or failure to comply with any requirement of a certificate of appropriateness, the Community and Economic Development Department shall investigate the complaint. If the complaint has merit, and attempts to remedy the complaint fail, the Community and Economic Development Department may place the complaint on the agenda of the regular meeting of the planning and zoning commission, provided that the certificate holder shall have at least fourteen (14) days' notice of the meeting. 3. Certificate holder shall be given written notice of the exact nature of the complaint and the date and time of the hearing before the commission. The hearing shall be held in accordance with customary administrative hearing procedures. ---PAGE BREAK--- Page 8 of 31 4. The commission, after hearing the evidence presented regarding the complaint, may continue the hearing from time to time, modify or rescind any condition or requirement of the certificate of appropriateness as it deems necessary, revoke the certificate of appropriateness, or take no action and dismiss the complaint. 5. Any certificate holder aggrieved by an order entered by the commission pursuant to this section may maintain an action for relief therefrom in any court of competent jurisdiction. Action for relief must be filed with the court within thirty (30) days after the order from which relief is sought is made. 6. All notices required herein shall be provided by personal service or by certified mail. 7. If the construction of building improvements has not commenced within eighteen (18) months of the design approval or if construction has ceased for a period of one year or longer, the certificate of appropriateness and any associated building permit shall expire. Certificates of appropriateness shall be issued for a period of eighteen (18) months and shall become void unless construction is commenced within eighteen (18) months of date of issuance. Applicants may request an extension of up to six calendar months during the final month prior to expiration. After the expiration of a design approval, the applicant shall be required to resubmit the plans, pay all required fees, and obtain a certificate of appropriateness prior to the issuance of a building permit. 17.170.060: HEARING PROCEDURES: A. Applications: The Community and Economic Development Department shall receive applications for certificates of appropriateness as required under subsection 17.170.050 of this chapter. The design review committee must provide a recommendation to the commission within sixty (60) days from the date of application. Members of the Design Review Committee and the Planning Commission may enter, solely in performance of their official duties and only at reasonable times, upon private lands for examination or survey thereof. However, no member, employee, or agent of the committee or commission may enter any private building without express consent of the owner or occupant thereof. B. Public Hearing: Prior to issuance or denial of a certificate of appropriateness, the commission shall hold a public hearing concerning an application for a certificate of appropriateness for major alterations and new construction. The commission shall take such action as may reasonably be required to inform the owners of any property likely to be materially affected by the application and shall give the applicant and such owners an opportunity to be heard. A written notice of the proposal shall be sent at least ten (10) days prior to the hearing to the applicant and to owners of property lots, parcels or tracts of land) within three hundred feet (300') of the property that is the subject of an application for a certificate of appropriateness. ---PAGE BREAK--- Page 9 of 31 C. Final Action: Unless otherwise agreed to by the applicant, the commission shall hold the public hearing and take a final action on an application for a certificate of appropriateness within thirty (30) days from the date the commission receives a recommendation from the design review committee. The commission's final action on an application for a certificate of appropriateness for major alterations and new construction shall be by the passage of a motion to take one of the following actions: 1. Grant the certificate of appropriateness as proposed; 2. Grant the certificate of appropriateness subject to specific conditions and/or modifications of the proposal presented in the application for a certificate of appropriateness; 3. Deny the certificate of appropriateness as proposed or modified. D. Appeal: 1. Minor Alterations: Minor alterations denied by the administrative staff may be appealed to the board of adjustment by filing written notice with the board of adjustment within thirty (30) calendar days from issuance of the written decision by the administrative staff. 2. Major Alterations and new construction: An appeal of the commission's action in granting or denying any certificate may be taken to the board of adjustment by filing written notice to the board of adjustment within thirty (30) calendar days from issuance of the written decision by the commission: a. By any aggrieved party; and b. Shall be taken within times prescribed by the commission; and c. Shall be a review of the record to determine whether the decision was so unreasonable as to be arbitrary and capricious. 17.170.070: HISTORIC PRESERVATION IN THE MCCD: The City has identified certain buildings of special historical significance that should be preserved. The following standards designate the buildings the City has identified as historically significant and the process for making alterations to historically significant buildings. A. Designation Process: Significant historic buildings are identified based on meeting two or more of the following criteria: ---PAGE BREAK--- Page 10 of 31 1. Has major historical significance associated with significant events, activities, or persons in the history and development of Murray; 2. Has major architectural significance by reflecting a particular architectural style or time period at least 50 years or older and retains its character defining elements; 3. Any alterations that have compromised its character defining features can reasonably be reversed in whole or part. The following properties are deemed historically significant and will be preserved and must meet the preservation requirements outlined below: 4836, 4838, 4842, 4844, 4841, 4859, 4861, 4863, 4871, 4873, 4877, 4881, 4883, 4889, 4901, 4959, 4961, 4963, 4973 South State Street and 166, 184, 186, 190, 192 East Vine Street 4843, 4872, 4886 South Poplar, 120 East 4800 South, and 5000, 5002, 5004, 5006 South Jones Court. B. Alterations: Alterations of Significant Historic structures shall be reviewed through the certificate of appropriateness process outlined above. Changes will be reviewed for general compliance with the MCCD design guidelines including the additional guidelines for significant historic properties found in this title and the design guidelines. Owners of historic buildings may request exemptions from design standards or guidelines of the MCCD which would alter the historic appearance of the building. C. Re-Location: Re-Location of an existing significant historic building is allowed and is subject to approval of a certificate of appropriateness including review by the design review committee and approval by the planning commission. Details on the site for the relocation and technical reports will be required to ensure the building preserves its historical character. D. Demolition: An application for a certificate of appropriateness authorizing the relocation, demolition or destruction of a designated significant historic building shall be discouraged. The planning commission shall not issue a certificate of appropriateness for demolition of a designated significant historic building within the MCCD except under at least one of the following circumstances: 1. The owner of the property would suffer extreme hardship or be permanently deprived of all economic use or return by virtue of the denial; or 2. The value of owner's property would be substantially diminished; or 3. A City building official has verified in writing that the building is an imminent hazard to public safety or health and repairs are impractical. ---PAGE BREAK--- Page 11 of 31 E. Exception Process: An exception may be considered by the Planning Commission to allow demolition of a significant building if a development proposal is presented meeting the following criteria: 1. The applicant has demonstrated to the Planning Commission that incorporation of the significant historic building in the proposed development is impractical based on the condition of the existing building, structural incompatibility or other similar constraints; 2. A new proposal is presented that demonstrates adherence to the goals and objectives of the MCCD; 3. The proposal must demonstrate compliance with ordinance standards and design guidelines; 4. If demolition is granted, developer must implement a monument and narrative inscription describing the history of the building or a public art project approved by the History Advisory Board; 5. Development Agreement: A development agreement must be executed between the City and property owner regarding the project. The development agreement shall be approved by the City Council prior to the issuance of the Certificate of appropriateness and shall include the following elements: a. There must be immediacy of the project and a development timeline must be submitted with a twenty-four (24) month project completion period; b. If demolition is approved, the applicant/property owner must be willing to provide a performance security and financial guarantee equal to one hundred twenty-five percent (125%) of the estimated cost of the project to ensure project completion if demolition of the historic building is granted; c. Demolition shall not be approved until a building permit has been issued for the proposed development and evidence of adequate financing has been submitted to the City; d. Proposed projected value of the project must be at least five times the current assessed valuation of the property; e. Project must include all commercial or a mix of residential and commercial equal to square footage amounts of one hundred percent (100%) ground floor commercial and an additional twenty-five percent (25%) commercial in upper level floors; ---PAGE BREAK--- Page 12 of 31 f. Demonstration of the proposed number of jobs created and quality of jobs (including wage and benefit projections) must be provided as part of the development proposal; g. Public benefit must be substantiated. 6. Demolition Request Denial: The Planning Commission shall make a determination after all of these criteria have been addressed by the applicant and evaluated through the design review process. If the Planning Commission determines that any of the criteria are not met, they shall deny a requested demolition. F. Land Use, Interior Arrangement, Maintenance, Emergency Repairs Not Considered: 1. Nothing herein shall be construed to prevent a property owner from making any use of his or her property not prohibited by other statutes, ordinances or regulations. 2. The committee and commission shall have no jurisdiction over interior arrangement and shall take no action except to prevent the construction, reconstruction, alteration, restoration, moving or demolition of buildings, structures, appurtenant features, outdoor advertising signs, or other significant features which would be incongruous with the special character of a historic structure. 3. The jurisdiction of the committee and commission shall be limited to specific interior features of architectural, artistic or historical significance in publicly owned buildings designated as historically significant buildings. 4. The ordinary maintenance or repair of any exterior architectural feature of a building in areas which does not involve replacing the feature or a change in design, material, color or outer appearance thereof, shall not be prevented by the requirements of this chapter. 5. Nothing in this chapter shall be construed to prevent: a. The maintenance; or b. In the event of an emergency, the immediate restoration of any existing aboveground utility structure without approval by the commission. 6. The construction, reconstruction, alteration, restoration, moving or demolition of any exterior architectural features, which the City building inspector or similar official shall certify is required for public safety because of an unsafe or dangerous condition, shall not be prevented by the requirements of this chapter. ---PAGE BREAK--- Page 13 of 31 17.170.080: USES: A. The inclusion of a major heading includes all subcategories listed under the major heading unless otherwise excepted. (For example, listing 6900 miscellaneous service organizations includes all categories and subcategories listed from 6910 through 6999.) Any use not specifically listed shall be prohibited. B. The following uses are permitted in the Murray City Center District (MCCD): Use No. Use Classification 1120 Multiple Family Dwelling (Residential not permitted on ground floor). 1130 Multiple Family Dwelling (Residential not permitted on ground floor). 1150 Apartment High-Rise. (Residential not permitted on ground floor). 1511 Hotels. 2180 Beverages. 2300 Manufacture- Apparel. hand work trades only in no more than 5,000 square feet; deliveries and shipping only during normal business hours; no odors; no outside storage). 2740 Commercial Printing hand work trades only in no more than 5,000 square feet; deliveries and shipping only during normal business hours; no odors; no outside storage). 2760 Greeting Cards hand work trades only in no more than 5,000 square feet; deliveries and shipping only during normal business hours; no odors; no outside storage). 3259 Pottery hand work trades only in no more than 5,000 square feet; deliveries and shipping only during normal business hours; no odors; no outside storage). 3911 Jewelry. hand work trades only in no more than 5,000 square feet; deliveries and shipping only during normal business hours; no odors; no outside storage). 3950 Costume Jewelry hand work trades only in no more than 5,000 square feet; deliveries and shipping only during normal business hours; no odors; no outside storage). 4210 Commercial parking lots and garages on a fee basis (Except surface parking lots not associated with a permitted use). 5400 Food stores. 5600 Apparel and accessories. 5810 Eating places (except 5813; CUP required for drive-through sales.) 5820 Drinking places - alcoholic beverages. 5910 Drug and proprietary. ---PAGE BREAK--- Page 14 of 31 5920 Liquor, package (state store). 5930 Antiques and secondhand merchandise. (except 5935, 5938 and 5939 - construction materials). 5940 Books, stationery, art, and hobby supplies. 5950 Sporting Goods, Bicycles, and Toys (except 5951). 5969 Garden supplies. 5970 Jewelry. 5990 Miscellaneous retail trade. 6100 Finance, insurance, and real estate services (except 6112, 6123, 6124, 6141 - surety bail bonding only). 6213 Dry cleaning (in no more than 7,500 square feet; no outside storage.) 6216 Self-service laundries. 6220 Photographic services. 6230 Beauty and barber services. 6250 Apparel repair, alteration, and cleaning, shoe repair services (except 6256). 6290 Personal services (except 6293, 6294). 6310 Advertising services (office only; no outside storage; no billboards). 6330 Duplicating, mailing, stenographic, and office services. 6340 Dwelling and building services (office only, except 6342, 6345). 6350 News Syndicate Services. 6360 Employment services. 6390 Business services (office only, except 6393, 6394 and 6397). 6493 Watch, clock, jewelry repair, engraving. 6496 Locksmiths and key shops. 6499 Miscellaneous small item repair (Maximum 5,000 square feet; no outside storage). 6500 Professional services (office only, except 6513 and 6516, 6518, 6518.1, 6550). 6600 General Construction Services (office only, no material storage or equipment service yards.) 6700 Governmental services (except 6714, 6740, 6750, and 6770). 6800 Educational services. 6900 Miscellaneous service organizations. 7100 Cultural activities and nature exhibitions (except 7123, 7124, 7129). 7210 Entertainment assembly (except 7213). 7220 Sports assembly (except 7221, 7222, 7223, 7224). 7230 Public assembly. 7391 Penny arcades and other coin operated amusements. 7395 Card rooms. 7396 Dance halls, ballrooms (includes dance clubs). 7397 Billiard and pool halls. 7399 Bicycle rental, tourist guides only. ---PAGE BREAK--- Page 15 of 31 7410 Bowling alleys. 7420 Playgrounds and athletic areas. 7425 Athletic clubs, bodybuilding studios. 7432 Swimming pools and schools. 7451 Archery range (indoor only). 7492 Picnic areas. 7600 Parks (public and private). 7910 Other Cultural, Entertainment, Recreational Activities 8221 Veterinarian services (completely enclosed within a building; no overnight boarding). 8224 Pet grooming (completely enclosed within a building; no overnight boarding). C. A development parcel may have more than one main building. D. The following accessory structures and buildings, which are customarily used in conjunction with and are incidental to the principal uses and structures, are permitted: 1. Parking structures; and 2. Other accessory buildings which do not in aggregate have a footprint greater than twenty five percent (25%) of the footprint of the main buildings on a development parcel. E. More than one permitted use may be located on a development parcel and within a building. F. The following uses and structures are permitted in the MCCD only after a conditional use permit has been approved by the planning commission and subject to the terms and conditions thereof: Use No. Use Classification 3250 Pottery and related products (excepting 3251 and 3255; handwork trades only ; no loading dock; deliveries and shipping only by van or small truck during normal business hours; no odors; no outside storage). 3500 Professional, scientific, and controlling instruments; photographic and optical goods; watches and clocks (handwork trades only; no loading dock; deliveries and shipping only by van or small truck during normal business hours; no odors; no outside storage). 5813 Drive-through restaurant (Parking and maneuvering areas must be located to the rear of building; Drive-through windows and lanes may not be located between the street and building front). 6513 Hospitals ---PAGE BREAK--- Page 16 of 31 G. The following are uses not permitted in the area: Use No. Use Classification 5510 Motor Vehicle Sales 5530 Service Stations 5590 Automotive, Marine crafts, aircrafts and accessories 5960 Farm and Garden Supplies 6379 Self Storage units 6394 Equipment Rental and leasing services 6397 Automobile, truck and trailer services 6410 Automobile repair and related services 7213 Drive-in movies (outdoor theater) 7394 Go-cart tracks 7398 Auto racing, miniature 17.170.090: SUSTAINABILITY STANDARDS (Refer to Chapter 1 of MCCD Design Guidelines for Further Information): A. The Murray City Center District (MCCD) has adopted the goal of pursuing and achieving sustainable development practices that could lead to the eventual attainment of LEED-ND (Neighborhood Development) certification for the entire City Center District and encourages LEED- certification for all individual buildings. The City may provide incentives for developers who pursue LEED-certification for buildings. LEED-ND standards are defined in the MCCD Design Guidelines and are recommended as standards for the development of the area. B. The City recognizes that, regardless of third party certification level, there are standards that are in the best interest of the health, safety, and general welfare of the residents of Murray. Standards to promote efficient and sustainable development have been included in the parking, landscaping and building and site design standards of the MCCD and are required whether or not an individual development attains LEED certification. In addition, the following sustainability standards apply: 1. All new public buildings and uses shall be LEED Certified at the Silver level; 2. All new developments shall provide for on-site treatment of storm water run-off from rooftops and hardscape areas. Each development shall be responsible for pre-treating the run-off from their site through the use of bio- swales or green-roofs prior to allowing the water to enter the Little Cottonwood Creek watercourses, or the Murray City storm-water drainage system; 3. All new construction shall minimize site disturbance and include a Storm Water Pollution Prevention Plan for the site and obtain a land disturbance permit from Murray City on sites greater than 1 acre in size; ---PAGE BREAK--- Page 17 of 31 4. Water Sense labeled plumbing fixtures are also required in the buildings for ALL new development and all new plumbing fixtures in existing buildings; 5. All new buildings must demonstrate an average ten percent (10%) improvement over ANSI/ASHRAE/IESNA Standard 90.1-2007 (with errata but without addenda). Buildings undergoing major renovations must demonstrate an average five percent improvement over ANSI/ASHRAE/IESNA Standard 90.1-2007. Documentation of energy efficiency will be in accordance with the standards outlined in Appendix A of the adopted design guidelines for the MCCD. New multi-family residential buildings three stories or fewer, ninety percent (90%) of buildings must meet ENERGY STAR or equivalent criteria. Projects may demonstrate compliance with ENERGY STAR criteria through the prescriptive requirements of a Builder Option Package, the Home Energy Rating System (HERS) index, or a combination of the two; 6. For nonresidential buildings, mixed use buildings, and multi-family residential buildings four stories or more indoor water usage in new buildings and buildings undergoing major renovations must be an average of twenty percent (20%) less than in baseline buildings as defined in Appendix A of the adopted design guidelines for the MCCD; 7. For new multiunit residential buildings three stories or fewer, ninety percent (90%) of buildings must use a combination of fixtures that would reduce water usage in accordance with Appendix A of the adopted design guidelines for the MCCD; 17.170.100: AREA, WIDTH, FRONTAGE AND YARD REGULATIONS: The main entry to a building should provide a strong connection to the street – one which is expressive, welcoming and easily located. The following standards for setbacks or facades and entries are intended to contribute to the vibrant, connected, active, pedestrian-oriented streetscape that is envisioned for the District: 1. All street-facing building facades are to be designed so that fifty percent (50%) of the total linear feet of frontage is contiguous to the sidewalk (Setback: 0 feet from front property line); or 2. If setbacks are proposed: a. All street-facing building facades are to be designed so that eighty percent (80%) of the total linear feet are within twenty-five feet (25’) from the back face of curb and gutter; and/or ---PAGE BREAK--- Page 18 of 31 b. All street-facing building facades are to be designed so that fifty percent (50%) of the total linear feet are within eighteen feet (18’) from the back face of curb and gutter. 17.170.110: BUILDING DESIGN AND SCALING: A. The primary entrance to buildings must be clearly identifiable. B. The primary entrance of a building must be oriented to face a street, plaza or pedestrian way. Functional entries must appear at least once every seventy-five feet (75’) on average. C. The functional entry of each new building must be oriented to face the public street, public square, park, or plaza, but not a parking lot. D. The primary entrance to a building shall have a pedestrian-scaled facade. E. Building entries must be covered with canopies/awnings and/or recessed entries. F. Building entries must meet all local, State, and American with Disabilities Act accessibility requirements. G. For corner buildings, entries are required on both street facades. H. All front setback areas, if proposed, shall be landscaped in accordance with the MCCD Design Guidelines. I. Off-Street parking is not permitted in the front setback area and/or between the street and building. Parking shall be located to the side or rear of the building. J. Maintenance buildings, trash collection and recycling areas, storage and service areas, mechanical equipment and loading docks shall not be permitted in the front setback of any building. Single or ganged utility meters or other service equipment may be located in the front setback of any building; provided, there are site constraints which preclude their access in a location elsewhere on site, and they are screened and approved by the City. K. The side lot area between non-adjoining buildings and the property line shall be developed as parking, plaza, landscaped open space, or a landscaped walkway with access to the sidewalk. L. Encroachments may project into the public right-of-way provided that the encroachments are between nine feet and seventeen (17’) feet above the sidewalk height, subject to City and Utah Department of Transportation approval where applicable. They must not obstruct or prevent the placement of street trees or other improvements within the public right-of-way. ---PAGE BREAK--- Page 19 of 31 M. Blank walls shall not occupy over fifty percent (50%) of a principal frontage. Non- residential buildings and structures shall not have a section of blank wall exceeding thirty (30) linear feet without being interrupted by a window or glass entry door. All development shall provide ground floor windows on the building façade and adjacent to a public or private street, including private pedestrian-only streets, parks, paths, or courts. Darkly tinted windows and mirrored windows which block visibility are prohibited as ground floor windows. N. All buildings must meet the ground with some form of base element or detailing to visually connect the building to the landscape. The base element may be smooth concrete (architectural grade), masonry, or stone. O. Ground level unit entries shall have a finished floor less or equal to twenty-four inches (24”) above sidewalk grade. P. Exceptions to these standards are allowed if buildings are located in designated open space area as identified in the design guidelines. Structures located or being relocated into these areas shall be allowed residential setback standards. 17.170.120: HEIGHT REGULATIONS: There are no height restrictions in the district except as provided herein: 1. For new buildings located west of State Street and south of 4800 South, a minimum height of forty feet (40’) or four stories, whichever is less, is required; 2. The height of a structure located adjacent to a residential zoning district may not exceed fifty feet (50’) within one hundred fifty feet (150’) of a residential zoning district; 3. Buildings over ten (10) stories in height must have a podium which addresses the pedestrian nature of the street. A pedestrian scaled façade must be provided. A podium shall be a maximum of three stories. The tower portion shall step back. Location and extent of podium will be determined through the design review process; ---PAGE BREAK--- Page 20 of 31 Figure 17.170.120-1: Podium 4. Buildings located east of State Street are exempt from the minimum height requirement; 5. Public or quasi-public utility buildings and structures are exempt from the minimum height regulations above. This exemption does not include office buildings for public or quasi-public utility companies. 17.170.130: LIGHTING: A. Street and sidewalk lighting shall meet adopted City light design standards. B. Illumination levels shall not exceed IESNA recommended practice. C. Lighting shall be provided for pedestrian ways that is appropriately scaled to walking. Light standards shall not be taller than twelve feet Attached lighting shall be provided at two feet above entrances etc. D. Lighting shall be shielded to prevent any off-site glare. E. All site lighting luminaires will conform to IESNA ‘Cutoff’ or ‘Sharp Cutoff’ classifications. See Appendix B to the Design Guidelines. F. Luminaires with less than 1,000 lamp lumens can be used without shielding. G. A lamp color of 3,000K shall be used throughout the project. > 10 Stories 3 Stories Max. ---PAGE BREAK--- Page 21 of 31 H. For private lighting, metal halide and induction lamp sources or other approved lighting sources may be used subject to approval by the City Power Department. Building façade lighting must be shielded to avoid light trespass and illumination of the night sky. 17.170. 140: PARKING REGULATIONS: This section establishes the standards for the amount, location, and development of motor vehicle parking, standards for bicycle parking, and standards for on-site loading areas in the MCCD. Other titles of the City Code and Guidelines of the MCCD may regulate other aspects of parking and loading. A. General Regulations: 1. General: The regulations of this chapter apply to all parking areas in the MCCD, whether required by this code or constructed for the convenience of property owners or users. Parking areas include those that are accessory to a use, part of a commercial parking use, or for a park and ride facility in the community services use category. 2. Occupancy: All parking areas must be paved, striped and landscaped prior to occupancy of any structure unless a deferral agreement is completed with appropriate security as allowed in Section 17.76.110. 3. Calculations of amounts of required and allowed parking: a. When computing parking spaces based on floor area, areas inside of structures which are used for parking are not counted; b. The number of parking spaces is computed based on the primary uses on the site except as stated in Paragraph 17.140.B.3 below. When there are two or more separate primary uses on a site, the required or allowed parking is the sum of the required or allowed parking for the individual primary uses; c. For joint use parking, see section 17.170.140.B.3, below; d. When more than 20 percent of the floor area on a site is in an accessory use parking is calculated separately for the accessory use; e. On-street parking spaces immediately adjacent to the property may be used to meet the parking requirements set forth herein. 4. Use of required parking spaces: Required parking spaces must be available for the use of residents, customers, or employees of the use. Fees may be charged for the use of required off-street parking spaces. Required parking ---PAGE BREAK--- Page 22 of 31 spaces may not be assigned in any way to a use on another site, except for joint parking situations. See 17.170.140. B.3. Also, required parking spaces may not be used for the parking of equipment or storage of goods or inoperable vehicles. 5. Proximity of parking to use: Required parking spaces for residential uses must be located on the site of the use or within a tract owned in common by all the owners of the properties that will use the tract or in public parking facilities. Required parking spaces for nonresidential uses must be located on the site of the use or in parking areas within 500 feet of the development site property boundary. 6. Stacked parking: a. The requirements for parking spaces and all parking area development standards continue to apply for stacked parking. b. Stacked (Individual Mechanical Lift), tandem, or valet parking is allowed for nonresidential sites if an attendant is present to move vehicles. If stacked parking is used for required parking spaces, some form of guarantee or affidavit must be filed with the City ensuring that an attendant will always be present when the lot is in operation. c. Tandem parking is allowed for residential sites if parking spaces (front and back stalls) are reserved or designated for a single unit. Each stall constitutes a separate stall as counted toward the total required number of parking stalls. d. Stacked (multiple mechanical lift systems, or other automatic parking where individuals are not required to manually access and control the equipment) may be utilized for all uses without requiring an on-site attendant. e. Proper equipment safety labels, operational protocols, equipment maintenance and other fire, life and safety issues must be reviewed and approved by all applicable City Departments and meet any International Building Code and any other applicable plumbing, electric, or building codes. 7. Parking and Access Review and Approval: In addition to Community and Economic Development Department review, the Streets Division and Engineering Division review shall the layout of parking areas, curb cut and access restrictions as set forth in Chapter 17.72, Off-Street Parking and Motor Vehicle Access Standards. Parking for projects located along State Street shall also require approval from the Utah Department of Transportation (UDOT) related to access locations, curb cuts, etc. On-street overnight parking is prohibited in this area. ---PAGE BREAK--- Page 23 of 31 B. Required Parking Spaces: 1. Purpose: The purpose of required parking spaces is to provide enough on-site parking to accommodate the majority of traffic generated by the range of uses which might locate at the site over time. Sites that are located in close proximity to transit, have good street connectivity, and good pedestrian facilities may need little or no off-street parking. Transit-supportive plazas and bicycle parking may be substituted for some required parking on a site to encourage transit use and bicycling by employees and visitors to the site. The required parking numbers correspond to broad use categories, not specific uses, in response to this long term emphasis. Provision of carpool parking, and locating it close to the building entrance, will encourage carpool use. 2. Required parking spaces for the MCCD: Table 17.170.140-1A outlines the required number of spaces for each specified use category. The standards of 17.170.140-1A apply to the entire MCCD unless specifically superseded by other portions of the City Code. Table 17.170.140-1A Required Parking (limited to the MCCD- Refer to 17.170.020: Boundaries): Required Maximum Office: 1 space / 500 net useable SF 1 space / 350 net useable SF Medical/Clinic: 1 space / 500 net useable SF 1 space / 300 net useable SF Retail: 1 space / 500 net useable SF 1 space / 265 net useable SF Restaurants: 1 space / 500 net useable SF 1 space / 265 net useable SF Residential: (Multi-family Dwellings) 1 space / unit 1.25 spaces / unit (2-bedrooms or less) 1.4 spaces / unit (more than 2- bedrooms) Disabled/Accessible See Chapter 17.72.070. Other requirements as provided by the Americans with Disabilities Act Uses not listed As determined by the Planning Commission based on the nearest comparable use standards. Parking in excess of Maximum Parking in excess of the maximums outlined above may be approved by the Planning Commission if provided in parking structures or within the envelope of the building. 3. Joint use parking: Joint use of required parking spaces may occur where two or more uses on the same or separate sites are able to share the same parking spaces because their parking demands occur at different times. Joint use of required nonresidential parking spaces is allowed if the following ---PAGE BREAK--- Page 24 of 31 documentation is submitted in writing to the City Planning Commission as part of a building or zoning permit application or land use review: a. The names and addresses of the uses and of the owners or tenants that are sharing the parking; b. The location and number of parking spaces that are being shared; c. An analysis showing that the peak parking times of the uses occur at different times and that the parking area will be large enough for the anticipated demands of both uses; and d. A legal instrument such as an easement or deed restriction that guarantees access to the parking for both uses. 4. Limit on size: A single parking area shall not exceed two acres in size. If the total parking area of a project exceeds an acre, it shall be divided into a series of separate lots. 5. Carpool Spaces: For new residential and non-residential portions of mixed use buildings, the number of carpooling parking spaces equivalent to ten percent (10%) of the total automobile parking for each non-residential and mixed use building on the site. Signage indicating carpool parking spots must be provided. Carpool parking must be within two hundred feet (200’) of entrances to buildings served. 6. Compact Stalls: Compact stalls may be used within the MCCD and shall not constitute more than fifteen percent (15%) of the total provided spaces for a use or development. In the case of parking structures, compact spaces shall be limited to fifteen percent (15%) of the total spaces in the structure. Minimum dimension for compact spaces shall be eight feet by sixteen feet 7. Bicycle parking: Bicycle parking may be substituted for up to ten percent (10%) of required parking. For every five non-required bicycle parking spaces that meet the short or long-term bicycle parking standards, the motor vehicle parking requirement may be reduced by one space. Parking existing prior to the effective date of this ordinance may be converted in accordance with this provision. Bicycle parking is required for most use categories to encourage the use of bicycles by providing safe and convenient places to park bicycles. These regulations ensure adequate short and long-term bicycle parking based on the demand generated by the different use categories and on the level of security necessary to encourage the use of bicycles for short and long stays. Bicycle racks shall be placed on every development as follows: ---PAGE BREAK--- Page 25 of 31 a. The minimum number of bicycle parking spaces for any use shall be five percent of the vehicular parking spaces required for such use, up to a maximum of twelve (12) spaces; b. At least two feet by six feet per bicycle; c. Designed to have sufficient space, to be a minimum of twenty-four inches beside each parked bicycle to allow access. This access may be shared by adjacent bicycles. Racks shall be installed a minimum of twenty-four inches (24”) from any wall or other obstruction; d. Located to prevent damage to bicycles by vehicles, etc.; e. In a convenient, visible, lighted area; f. Located so as not to interfere with pedestrian movements; g. Located to provide safe access to and from the street; h. Designed to allow each bicycle to be supported by its frame; i. Designed to allow the frame and wheels of each bicycle to be secured against theft; j. Anchored to resist rust or corrosion, or removal by vandalism; k. Designed to accommodate a range of bicycle shapes and sizes and facilitate easy locking without interfering with adjacent bicycles; l. Bike lockers designed for long term storage may be substituted for up to half the required bicycle parking spaces; m. Except for bike lockers, bicycle parking must be located within fifty feet (50’) of a building’s primary entrance. 17.170.150: LOADING AND SERVICE AREAS: Utilities, mechanical equipment placement and screening and service entries shall be considered early on in a project to minimize the impact both visually and acoustically and to address safety concerns. The visual impacts of utilities and mechanical equipment and any service area canopy shall be minimized using the following techniques: 1. Service entrances, waste disposal areas and other similar uses shall be located to the side or rear of buildings and shall be oriented toward service lanes and away from major streets; ---PAGE BREAK--- Page 26 of 31 2. Service areas shall be positioned to minimize conflicts with other abutting uses; 3. Screening walls/landscaping shall be provided to minimize visual impact of service and utility areas, using materials consistent with building design to integrate service and utility areas into design; 4. Screen height shall be sufficient to conceal view from right of way and public areas of site; 5. Screening shall be required for both ground-level mounted and rooftop- mounted mechanical equipment and utilities; 6. Height of screening around outdoor/rooftop equipment shall be limited to the minimum height necessary to screen equipment from public view including adjacent properties circulation routes; 7. Mechanical equipment, satellite dishes, vents, flues, and associated penetrations shall not be located on a roof slope that faces the public right of way; 8. Mechanical equipment may be screened by extension of the roof parapet if no roof-top equipment is visible from any public right of way within five hundred feet (500’); 9. Ground screening materials shall be of the same or complementary material/detailing as that of the main structure. 17.170.160: OPEN SPACE/LANDSCAPING: A. Each development shall have a system of pedestrian walkways and sidewalks that provide easy connections between the building entrances, neighboring building entrances, sidewalks, parking areas, open space and public trails. Sustainable landscaping including xeriscape species and innovative water recycling or irrigation systems is encouraged. All landscape plans must be approved by the City. B. Water conserving landscape designs shall be used. All landscaping must be irrigated and planted with substantial live plant material or appropriate xeriscape for the purpose of buffering, screening and beautifying the site, and shall comply with applicable landscape requirements found in chapter 17.68., except lawn shall not be required as stated in section 17.68.040(A)(1)(a). At plant maturity the landscaping shall represent, as a minimum standard, compatibility with surrounding developed properties and uses and must be permanently maintained by the owner or occupants. ---PAGE BREAK--- Page 27 of 31 C. All existing trees located at least fifteen feet (15’) outside of the building footprint shall be preserved unless otherwise approved by the City Forester. All proposed tree removals must also be approved by the City. D. Trees shall be spaced in order to provide shade for fifty percent (50%) of sidewalk length within five years of planting when combined with shade provided by approved structures. E. Where new plant materials are to be used, employ indigenous species into the plant palette. A minimum of seventy percent (70%) of groundcover and shrub plantings shall be indigenous species. A minimum of fifty percent (50%) of the trees planted shall be native species. No more than fifty percent (50%) of the landscaping areas shall be turf. If turf is specified, an eco-lawn mix shall be used. F. A one-hundred-foot (100’) minimum setback shall be provided from top of bank of Little Cottonwood Creek to any structure. Top of bank shall be located by a licensed surveyor or Engineer. G. Public spaces that are adjacent to wetlands or water course setbacks must have a native planting transition zone that blend into sensitive habitat areas. 17.170.170: Access Improvements and Street Character: A. Construction of new buildings or renovations of existing buildings where the cost of improvements or renovations to a property or site exceeds fifty percent (50%) of the assessed value of the buildings on the property. shall include construction and installation of the adjacent sidewalks, park strips and other landscaping, curbs, gutters, lighting, and street furniture as required in this chapter and as further described in the design guidelines. B. The improvements within the rights of way for public streets shall include but not be limited to the following standards: 1. The right-of-way widths within the Murray City Center District vary from one hundred forty feet (140’) to seventy feet (70’) and respond to the site conditions and traffic volume. There are five primary public streets that run through the Murray City Center including State Street, 5th Avenue, Box Elder Street, Poplar Street, and Vine Street; 2. Within the right-of-way, the drive lanes vary from ten feet (10’) to twelve feet (12’) with most streets having seven- to eight-foot on-street parallel parking areas. A minimum twelve foot (12’) pedestrian sidewalk is included within the right-of-way that includes an eight foot pedestrian zone along with a four foot furnishing or landscape strip between the sidewalk and edge of curb. ---PAGE BREAK--- Page 28 of 31 C. Benches shall be provided and spaced as approved by the City through the design review process. D. All streets and sidewalks shall be available for general public use and access and not gated. E. District standard street furniture shall be used for public walks, seating areas, courtyards, plazas, recreation areas, and trails. F. Within the public right-of-way and also on privately owned and maintained plazas/open spaces, a palette of site furnishings has been chosen for the area to provide visual continuity. Site furnishings shall comply with the standards outlined in the design guidelines. In areas that are adjacent to commercial or mixed-use areas, the furnishing zone may be treated as space that is actively used for seating, tables and other site furnishings. The surface material shall be a permeable paver or equivalent approved by the City through the design review process. 17.170.180: SIGN REGULATIONS: A. Signage in the MCCD shall be governed by the standards of the City Sign Code found in Chapter 17.48 of the zoning ordinance unless modified by the standards below. In calculating allowed sign area for attached signs the standards of Section 17.48.160 related to signs in Commercial and Manufacturing zones shall apply. Residential buildings shall be limited to signage indicating the name and address of the project and required informational and regulatory signs such as lobby hours or parking garage way- finding. B. Signs shall be designed in accordance with the MCCD design guidelines in relation to materials, color and sign type. New signs in the MCCD shall require the approval of a Certificate of Appropriateness and shall be considered a minor alteration requiring administrative review. C. New developments shall develop a master sign plan for the entire property which shall be used to guide individual sign design decisions. The master sign plan shall be submitted with a Certificate of Appropriateness for a Major Alteration. The master sign plan will contain information related to size, materials, colors and once the master sign plan is approved by the Commission, signage which complies with the overall design and materials of the master sign plan shall not be required to obtain an additional certificate of appropriateness. Approval of the master sign plan does not eliminate the requirement for a building permit for new signs where a permit is required. D. Existing properties and developments may submit a master sign plan for an entire site. The master sign plan shall be reviewed as a Major Alteration and shall require review by the design review committee and approval by the planning commission. Once the Master Sign Plan is approved by the Commission, signage which complies with the overall design and materials of the master sign plan shall not ---PAGE BREAK--- Page 29 of 31 be required to obtain an additional certificate of appropriateness. Approval of the master sign plan does not eliminate the requirement for a building permit for new signs where a permit is required. E. Sign removal from a building shall include restoration of the building face to the original condition and design. F. The following signs are exempt from the requirements of the MCCD: 1. Signs/ messages painted on the inside or outside of windows provided the signage covers no more than fifty percent (50%) of the window; 2. Government signs such as street signs; 3. Directional signs less than four square feet in size containing no commercial message. G. The following signs are prohibited within the MCCD: 1. Internally-illuminated sign cabinets, or “box/can” signs with acrylic, panaflex, or similar illuminated sheet material faces (Note: This is in contrast to the allowance in the 17.48 for internally (“directly”) illuminated signs.); 2. Vacuum-formed acrylic sign faces, letters, or cabinets; 3. Internally-illuminated awnings; 4. Signage shall not be permitted on the exterior facades of buildings or lease space that is not occupied by the business being promoted by the signage; 5. Pole-mounted signs (except public street signage), unless approved by the planning commission as part of a master sign plan; 6. Letters or logos applied or sewn onto externally-illuminated opaque awnings; 7. Internally illuminated pan channel letters with exposed neon unless approved by the planning commission; 8. Any other sign type specifically prohibited by Chapter 17.48. 17.170.190: VIOLATION AND PENALTY: Any person, firm or corporation whether acting as owner or occupant of the premises involved, or contractor or otherwise, who violates or refuses to comply with any of the provisions of this chapter, shall be guilty of a class C misdemeanor and, upon ---PAGE BREAK--- Page 30 of 31 conviction, punished as provided by law. A separate offense shall be deemed to be committed on each day an offense occurs or continues. Section 3. Effective date. This Ordinance shall take effect upon first publication. PASSED, APPROVED AND ADOPTED by the Murray City Municipal Council on this 15th day of March, 2011. MURRAY CITY MUNICIPAL COUNCIL James A. Brass, Chair ATTEST: Carol Heales City Recorder Transmitted to the Office of the Mayor of Murray City on this day of 2011. MAYOR’S ACTION: Approved DATED this day of 2011. Daniel C. Snarr, Mayor ATTEST: Carol Heales City Recorder ---PAGE BREAK--- Page 31 of 31 CERTIFICATE OF PUBLICATION I hereby certify that this Ordinance or a summary hereof was published according to law on the day of 2011. City Recorder