Full Text
GRADING PLAN CHECKLIST For excavation or grading in excess of five hundred (500) cubic yards – EXCEPT: Excavation below finished grade for basements and footings of a building, retaining wall or other structure authorized by a valid building permit; an excavation and/or fill, or combination thereof, which does not exceed a total of five hundred (500) cubic yards; clearing and grading, excavation and/ or fill, which does not exceed a total of five thousand square feet (5,000 sf) and does not obstruct a drainage course; an excavation and/or fill reviewed and approved as part of a building permit; excavations for water wells, tunnels or installation of service utilities by public and private utilities; cemetery graves. A SEPA checklist will be required for excavation or grading in excess of one thousand (1,000) cubic yards or if in a Critical Area. Please complete this checklist and include with your grading plan submittal for review. A licensed engineer must stamp the grading plan and the submittal must contain all information listed below. Incomplete applications cannot be accepted. If you have any questions, please call (509) 585-4419. Application & Fee (See Fee Schedule) - Grading Form completed and attached. Site address and parcel number (legal description) Submit one copy of the Grading Plan on 22-inch by 34-inch sheets. The Grading Plan shall be legibly drawn and contain the required information. All Grading Plans shall be drawn to a standard scale to be legible = 20 ft. preferred, 1” = 50 ft. maximum) the scale shall best fit the paper and be indicated on the plan. All proposed line work must be distinguished from existing line work. Graphic scale and north arrow. Vicinity map, parcel info, and legend. Property boundaries and exact dimensions. Names and location of all existing streets abutting the site. Dimensions, location of all on-site structures. Location of proposed walls, including top and bottom wall elevations. Location of any structures within fifteen-feet of the subject property or which may be affected by the proposed work. Streets – edge of pavement, curb, and centerline. Include street name(s). Critical areas identified, if any. Limits of clearing fenced with 42” orange fence, or approved filter fabric. Location of stockpile/staging areas. Location of construction entrance and detail. Existing and proposed contour lines drawn at five-foot intervals, or less. Intervals showing existing ground and details of terrain and area drainage to include surrounding off-site contours within 100-feet of the site. Location and size of all easements, right of way. Location of natural drainage systems, including perennial and intermittent streams, the presence of bordering vegetation, and flood plains. Setback areas and any areas not to be disturbed. Finished contours drawn at five-foot intervals as a result of grading. Proposed drainage channels and related construction with associated underground storm drainage lines sized and connections shown. KMC 18.72 ---PAGE BREAK--- General Notes addressing the following (may be listed on cover sheet): Total site area in square feet Area of work in square feet Number of cubic yards of soil to be added, removed, or relocated. Type and location of fill origin and destination of any soil to be removed. If known, finished floor elevations(s) of all structures, existing/proposed. Copy of Dust and Erosion control plan. Haul Route SEPA Checklist if excavation and/or grading is in excess of 1,000 cu yds. or if in a Critical Area (separate application and fee). PLEASE NOTE: • • • Applicant’s Signature Date AS BUILT DRAWINGS STAMPED BY A LICENSED ENGINEER WILL BE REQUIRED PRIOR TO FINALIZATION OF THIS PERMIT. THIS PERMIT IS FOR MASS GRADING. INSTALLATION OF UTILITIES IS NOT ALLOWED WITH THE GRADING PERMIT. PUBLIC WORKS CONSTUCTION PERMITS WILL NOT BE ISSUED FOR SITE DEVELOPMENT UNTIL THE GRADING WORK PERMITTED IS COMPLETE AND THE GRADING PERMIT HAS BEEN FINALIZED.