Full Text
Factory Built Structures Permit Packet Notice to applicants: This checklist is designed to provide the basic information needed to allow the Building Department and various agencies to complete a plan review of the proposed project. These are basic guidelines and more submittals may be required upon request. Definitions: Factory built structure - means any building or building component, including a manufactured home, a mobile home or a modular building, that is of closed construction and is entirely or substantially prefabricated or assembled at a place other than the building site. Manufactured home - means a structure as defined in section 39-4105, Idaho Code. Mobile home - means a structure as defined in section 39-4105, Idaho Code. Modular building - means any building or building component, other than a manufactured or mobile home, that is of closed construction and is either entirely or substantially prefabricated or assembled at a place other than the building site. Additional permits ARE REQUIRED for ELECTRICAL, PLUMBING, AND HVAC work. Please go to the States website at www.dopl.idaho.gov to obtain those permits. Permit applications are reviewed in the order they are received. To avoid delays please make sure that all required information is submitted. Two sets of Plans – Minimum size 11”x17” to scale (ALL Text must be Large enough to read) Site Plan • Building shall be correctly oriented and site specific. • Include location of all existing and new structures on site. • Include setbacks from structure to property lines, easements, and dimensions between structures. • Show locations of all utility lines, labeled. • Indicate drainage flow. Slope grade away from house 6” in 10’. • Indicate North Arrow • Indicate lots corners. • Indicate locations and dimensions of all easements Foundation Plan • Foundation and footings shall include dimensions and reinforcement type, size, and location. OR • Blocking and Anchoring design showing spacing, sizing, locations • Include heights for stem wall, including varying heights at stepped locations. • Detail insulation material types with R-value, location and weather protection for slabs, foundation stems, mono-footings, crawlspaces, and/or basement walls. • Hold-down types or other embedment hardware for framing attachments, including locations. • Cross-section of foundation and detail. • Indicate Foundation elevations • Indicate location and size of all foundation vents. • Skirting Details • Floor Plan • Building Dimensions • Window and door sizes and location • Location of ALL SMOKE DETECTORS and CARBON MONOXIDE alarms. • Braced wall lines clearly indicated (interior and exterior) with methods to be used and foundation attachment. • Labels for intended use of each Room. • Included Square Footage summary of the following: living area, garage, carport, covered patios, porches, basement (finished or unfinished), and any other areas. • Provide expanded floor plan for all rooms adjacent to an addition. (Additions only). Elevations • Front, back, and both sides. • Specific materials used for roof covering and exterior finishes • Stepped foundations, when applicable. Details • Detailed Drawings and manufactured specifications for the installation. ---PAGE BREAK--- *If this is a new factory built structure you will be required to obtain and provide a copy of the install tag information from the State of Idaho before a building permit will be issued by the City of Jerome. MFG # Additional permits may be REQUIRED from the State of Idaho for Electrical, Plumbing, and HVAC work. City of Jerome Factory Built Structure Application Received by: Date: SIGN SIGN