Full Text
City of Jerome Residential Application and Plan Review Submittal Checklist NOTICE TO APPLICANTS This checklist is designed pursuant to Chapter 41, Title 39, Section 39-4117 of the Idaho Building Code Act. It provides the detailed requirements of our building permit process and a list of the necessary documentation required by the City of Jerome to allow the applicant and various agencies to complete a plan review of proposed projects. However, additional submittals may be required upon request. Permit applications are reviewed in the order they are received. To avoid delays please make sure that all required information is submitted. Upon receipt of a submission or revised submission, we will respond in writing within 10 business days with our determination as to whether the application is complete or not. Our determination that the application is complete does not constitute approval of the project or authorize work to begin, but only that the application can proceed to a formal plan review. Please contact me if you have any questions or concerns while going through this document. Kortnie Kent [PHONE REDACTED] x 131 Our website: Our online portal link to complete the application for a building permit: ---PAGE BREAK--- City of Jerome Residential Application and Plan Review Submittal Checklist SCOPE AND APPLICATION This guide shall apply to the construction, alteration, relocation, enlargement, replacement, repair, equipment, use and occupancy, location, maintenance, removal and demolition of every building or structure or any appurtenances connected or attached to such buildings or structures. Additional permits may be REQUIRED by the State of Idaho for Electrical, Plumbing, and HVAC work. PROJECT VALUATION A Project Value is used to calculate fees for the building permit. Project Value is the total value of the construction work for which the permit is issued, including overhead and profit as well as finish work, painting, roofing, electrical, plumbing, heating/air conditioning, elevators, fire extinguishing systems, other permanent equipment, and owner supplied items. Project value excludes land. CURRENT CODES 2018 International Residential Code (with Idaho State amendments), 2018 International Fire Code, 2018 International Existing Building Code, 2018 International Energy Conservation Code (with Idaho State amendments), 2017 National Electric Code, 2018 International Mechanical Code (with Idaho State amendments) 2018 International Fuel Gas Cod (with Idaho State amendments), 2017 Idaho State Plumbing Code, and the 2009 ICC A117.1-2009 Accessible and Usable Buildings and Facilities. DESIGN CRITERIA THE MOST CURRENT AND ACCURATE DESIGN CRITERIA FOR YOUR PROJECT, CLICK HERE AND ENTER YOUR PROJECT ADDRESS. ➢ Wind Load 115 mph - 3-second gust ➢ The height and exposure adjustment coefficient is ➢ Snow Load 30 lbs. per sq. ft. (ground) Seismic design category ➢ The design temperature is 0 degrees Fahrenheit ➢ The weathering probability rating for concrete is “Severe” ➢ Frost line depth is 24” below the finished grade ➢ Maximum soil bearing pressure is 1500 lbs. per sq. ft. unless a soil investigation is provided ➢ Foundation walls over 8 ft. height require engineering design ➢ Buildings over two-story height or of unusual design may require engineering design ➢ Truss design drawings shall be in accordance with R802.10 and retained on-site. ---PAGE BREAK--- City of Jerome Residential Application and Plan Review Submittal Checklist BUILDING, FIRE & STRUCTURAL Site Plan - Location of new and existing structures with full dimensioned measurements to property lines, easements, & other structures within 10 feet of the proposed project. Foundation Plan- Include all required structural steel reinforcing, dimensions, and special inspection criteria. Floor Plan - Include all egress locations, egress distance measurements, exterior wall openings, door swings, use designation, exit signage, emergency lighting, locations of fire extinguishers. Elevations- North, South, East, West Building Sections and Details- Sections of walls, fire rated assemblies, stairways, and floor/ceiling assemblies. Details for all suspended ceilings, veneer or brick applications, etc. Room and Finish Schedules- Include the room finishes for ceilings, walls, and floors. Also, include schedules for all windows and doors, indicating the type, size, safety glazing, and door hardware. Structural Plans- Roof framing plan, floor framing plan, header and beam schedules, strap locations, structural details, shear walls, shear wall schedule, lintels, lintel schedule and all other structural information as indicated in the calculation or required by the Building Official. Modular/Mobile/Factory Built Structures- Modular buildings, whether residential or commercial- are regulated by DOPL; when approved, they will bear an insignia from the State of Idaho. Work done at the place of manufacture is not subject to further regulation by the City of Jerome. However, work done at the site, including the installation, is regulated by the City of Jerome. Modular buildings are regulated by local planning and zoning ordinance the same as site-built structures. Manual J, S and D calculations for HVAC system- Must include load calculations, duct system information and equipment selection. ---PAGE BREAK--- City of Jerome Residential Application and Plan Review Submittal Checklist Civil Site Plan- Must include the following: o Scale and format to be standard scale between 1:10 to 1:60 o Legal description and/or record of survey for the property and vicinity map. o Easements: Existing and/or proposed access. Utilities, drainage, wastewater. o Right-of-way: Improvements, both existing and proposed. Must show street cuts, alley cuts etc. o Storm drainage: Existing and/or proposed locations. ▪ Onsite design, please reference Jerome City Code Section 16:34 here. o Site grading plan o Utility Services- When new water, sewer and irrigation services are proposed (not existing), identify the size, and locations on the site plan. o Curb, gutter, sidewalk- When new curb, gutter and sidewalk are proposed (not exiting or in poor condition), identify the size and location on the site plan. Parking- Location of new and existing off-street parking spaces that meet the requirements of the Planning and Zoning Department. CONTACTS Building Safety Department— (208) 324-8189 x 131 Planning & Zoning Department – (208) 324-8189 x 140 Engineering Department – (208) 324-9669 Public Works Department— (208) 324-9669 Fire Department – (208) 324-2323 x 113 Idaho Division of Professional Licensing - (Electrical/Plumbing/HVAC Permits) - (208) 332-4700 or www.dopl.idaho.gov South Central Health District – (208) 324-8838