Full Text
Model: Steelworx Hip Shelter, 20' x 36' Model# HP-2036-SW Manufacturing Mission: To provide all prefabricated components and installation instructions for a 20' wide by 36' long (measured from eave to eave) free standing bolt together, tubular steel constructed shelter kit. Design Criteria: Structure shall be designed to meet site specific snow and wind load design criteria using most current applicable building codes. All structural members are ASTM A-500 U.S. grade B steel. Welded connection plates shall be ASTM A-36 hot rolled steel. All fabrication performed to latest AISC standards by AWS Certified welders. All framing connections are done using A325 grade bolts within concealed access openings from above and will later be concealed by the roofing. All roof framing shall be flush against the roof decking to eliminate the possibility of bird nesting. Tubular Steel Columns and Beams: Standard column dimension shall be 5" x 5" x 3/16" tubular steel welded to 5/8" base plates for surface mounting. Main support beams are 7" x 5" x 3/16", perimeter purlins are 6" x 3" x 1/8" and interior purlins are 5" x 3" x 1/8". Steel sizes are preliminary and may change due to ongoing review and final engineering. Roofing: 24 Ga. pre-cut steel Multi-Rib panels with Kynar 500 finish in a variety of colors with white underside. Standard roof slope is a 4/12 pitch with a eave height of Attached to structural framing with exposed self tapping screws painted to match roof color. Matching 24 Ga. trim included. Frame Finish: All steel framework will receive a corrosion protective TGIC Polyester powder coat, electro-statically applied and cured at 400°F. A large selection of standard colors are available. Foundation: All columns need to be anchored to concrete footings (footing design provided separately). Columns can be surface mounted to footings with anchor bolts at or below finish slab elevation or they can be embedded directly into the footing without base plates upon request. Anchor bolts and bracing templates are included. Optional base plate covers are available at an additional cost. Hardware: All structural hardware and roofing fasteners shall be provided. Warranty: 10 years against manufacturer defects. Not Included: Concrete work of any kind, unloading of product and installation. Warren, Ml 48089 Office: (586) 486-1088 Fax: (586) 754-9130 Toll Free: (800) 657-6118 Recreational Architecture Email: [EMAIL REDACTED] A Division of Ross & Barr Inc. www.CoverWorx.com Steelworx Hip Shelter - 20' x 36' Model: HP-2036-SW DESIGN SPECIFICATIONS ---PAGE BREAK--- 20'-0" 24 Ga. STEEL ROOF PANELS & TRIM 6" x 3" TUBE STEEL PURLIN 11’ 10” 5" x 5" TUBE STEEL 8’ COLUMN (TYP) FRONT ELEVATION SCALE: Not to scale 36'-0" 8’ SIDE ELEVATION SCALE: Not to scale 36'-0" I< 16’ 6” > I< 16’ 6” > I < 1’ 6” 20’ TUBE STEEL PURLIN 17’ X 3" to 5" X 3 " ) (TYP) 7"x 5" TUBE STEEL HIP BEAM (TYP) 5" x 5" TUBE STEEL COLUMN (TYP) FRAMING PLAN SCALE: Not to scale Warren, Ml 48089 Office: (586) 486-1088 Fax: (586) 754-9130 Toll Free: (800) 657-6118 Recreational Architecture Email: [EMAIL REDACTED] A Division of Ro ss & Ba r r Inc. www.CoverWorx.com Steelworx Hip Shelter - 20' x 36' Model: HP-2036-SW DESIGN SPECIFICATIONS