Full Text
Exhibits to EJCDC® E-500, Agreement between Owner and Engineer for Professional Services. Copyright© 2020 National Society of Professional Engineers, American Council of Engineering Companies, and American Society of Civil Engineers. All rights reserved. TOC Page 1 of 1 EXHIBITS TO AGREEMENT BETWEEN OWNER AND ENGINEER FOR PROFESSIONAL SERVICES TABLE OF CONTENTS EXHIBIT C—AMENDMENT TO OWNER-ENGINEER AGREEMENT EXHIBIT G—INSURANCE EXHIBIT J—PAYMENTS TO ENGINEER FOR SERVICES AND REIMBURSABLE EXPENSES: INTRODUCTION COMPENSATION PACKET BC-1: BASIC SERVICES—LUMP SUM ---PAGE BREAK--- Exhibit C—Amendment to Owner-Engineer Agreement. Exhibits to EJCDC® E-500, Agreement between Owner and Engineer for Professional Services. Copyright© 2020 National Society of Professional Engineers, American Council of Engineering Companies, and American Society of Civil Engineers. All rights reserved. Page 1 of 1 EXHIBIT C—AMENDMENT TO OWNER-ENGINEER AGREEMENT AMENDMENT TO OWNER-ENGINEER AGREEMENT Amendment No. [Enter Amendment Number] Owner: [Name of Owner] Engineer: [Name of Engineer] Project: [Name of Project] Effective Date of Owner-Engineer Agreement: [Effective Date of Agreement] Nature of Amendment: (Check those that apply) ☐ Additional Services to be performed by Engineer ☐ Modifications to services of Engineer ☐ Modifications to responsibilities of Owner ☐ Modifications of payment to Engineer ☐ Modifications to time(s) for rendering services ☐ Modifications to other terms and conditions of the Agreement Description of Modifications: [Here describe the modifications, in as much specificity and detail as needed. Use an attachment if necessary. Include cost breakdown and documentation, if applicable.] Agreement Summary: Original agreement amount: $ Net change for prior amendments: $ This amendment amount: $ Adjusted Agreement amount: $ Change in time for services (days or date, as applicable): Owner and Engineer hereby agree to modify the above-referenced Agreement as set forth in this Amendment. The Effective Date of the Amendment is [Enter Effective Date of Amendment]. Owner Engineer (typed or printed name of organization) (typed or printed name of organization) By: By: (individual’s signature) (individual’s signature) (Attach evidence of authority to sign.) (Attach evidence of authority to sign.) Date: Date: (date signed) (date signed) Name: Name: (typed or printed) (typed or printed) Title: Title: (typed or printed) (typed or printed) ---PAGE BREAK--- Exhibit G—Insurance. Exhibits to EJCDC® E-500, Agreement between Owner and Engineer for Professional Services. Copyright© 2020 National Society of Professional Engineers, American Council of Engineering Companies, and American Society of Civil Engineers. All rights reserved. Page 1 of 2 EXHIBIT G—INSURANCE ARTICLE 1—INSURANCE Paragraph 6.04 of the Agreement, Insurance, is supplemented to include the following Exhibit G Paragraphs 1.01 and 1.02: 1.01 Insurance Policies and Limits A. In accordance with Paragraph 6.04.A of the Agreement, the insurance that Engineer must procure and maintain, and the policy limits of such insurance, are as follows: Coverage Policy limits of not less than: Workers’ Compensation State Statutory Employer’s Liability Each accident $1,000,000 Commercial General Liability General Aggregate $2,000,000 Bodily Injury and Property Damage—Each Occurrence $1,000,000 Automobile Liability Bodily Injury Each Person $1,000,000 Each Accident $1,000,000 Property Damage Each Accident $1,000,000 Or Combined Single Limit (Bodily Injury and Property Damage; Each Occurrence) $1,000,000 Excess or Umbrella Liability Each Occurrence $1,000,000 Professional Liability Each Claim $1,000,000 Annual Aggregate $1,000,000 ---PAGE BREAK--- Exhibit G—Insurance. Exhibits to EJCDC® E-500, Agreement between Owner and Engineer for Professional Services. Copyright© 2020 National Society of Professional Engineers, American Council of Engineering Companies, and American Society of Civil Engineers. All rights reserved. Page 2 of 2 1.02 Additional Insureds A. Owner shall cause Engineer, its Subconsultants, and its Engineer's Subcontractors to be listed as additional insureds on any of Owner's general liability policies that are applicable to the Project. The following individuals or entities are to be listed on Owner's general liability policies of insurance (and on Contractor's policies required under Paragraph 6.04.D of the Agreement) as additional insureds: Name of Additional Insured Address [Engineer] [Engineer’s Corporate Address] [Engineer’s Subconsultant] [Subconsultant’s Corporate Address] [Engineer’s Subconsultant] [Subconsultant’s Corporate Address] [Other Additional Insured] [Other Additional Insured’s Corporate Address] B. During the term of this Agreement the Engineer shall notify Owner of any other Subconsultant or Engineer's Subcontractor to be listed as an additional insured on Owner's and applicable Contractor's general liability policies of insurance. C. The Owner must be listed on Engineer's general liability policy as provided in Paragraph 6.04.B. D. For applicable Contractor's general liability policies of insurance, the additional insured endorsements will include both ongoing operations and products and completed operations coverage through ISO Endorsements CG 20 10 10 01 and CG 20 37 10 01 (together). If Contractor demonstrates to Owner that the specified ISO endorsements are not commercially available, then Contractor may satisfy this requirement by providing equivalent endorsements. E. For applicable Contractor's general liability policies of insurance, Contractor shall provide ISO Endorsement CG 20 32 07 04, "Additional Insured—Engineers, Architects or Surveyors Not Engaged by the Named Insured" or its equivalent for Engineer, Subconsultants, and other design professional additional insured. ---PAGE BREAK--- Exhibit H—Dispute Resolution. Exhibits to EJCDC® E-500, Agreement between Owner and Engineer for Professional Services. Copyright© 2020 National Society of Professional Engineers, American Council of Engineering Companies, and American Society of Civil Engineers. All rights reserved. Page 1 of 1 ---PAGE BREAK--- Exhibit J—Payments to Engineer for Services and Reimbursable Expenses. Compensation Packet BC-1: Basic Services—Lump Sum. Exhibits to EJCDC® E-500, Agreement between Owner and Engineer for Professional Services. Copyright© 2020 National Society of Professional Engineers, American Council of Engineering Companies, and American Society of Civil Engineers. All rights reserved. Page 1 of 1 EXHIBIT J—PAYMENTS TO ENGINEER FOR SERVICES AND REIMBURSABLE EXPENSES COMPENSATION PACKET BC-1: BASIC SERVICES—LUMP SUM ARTICLE 1—COMPENSATION PACKET BC-1: BASIC SERVICES—LUMP SUM Article 2 of the Agreement is supplemented to include the following Exhibit J Paragraph 1.01: 1.01 Compensation for Basic Services (other than Resident Project Representative)—Lump Sum Method of Payment A. Owner shall pay Engineer for Basic Services set forth in Exhibit A (except for Resident Project Representative services, if any) as follows: 1. A Lump Sum amount of $[Enter Amount] based on the following estimated distribution of compensation: a. Study and Report Phase $ b. Preliminary Design Phase $ c. Final Design Phase $ d. Bidding and Negotiating Phase $ e. Construction Phase $ f. Post-Construction Phase $ 2. Engineer may alter the distribution of compensation between individual phases noted herein to be consistent with services actually rendered, but compensation will not exceed the total Lump Sum amount unless approved in writing by the Owner. 3. The Lump Sum includes compensation for Engineer's services and services of Engineer's Subcontractors and Subconsultants, if any. Appropriate amounts have been incorporated in the Lump Sum to account for labor costs, overhead, profit, and expenses (other than any expressly allowed Reimbursable Expenses). 4. In addition to the Lump Sum, Engineer is also entitled to reimbursement from Owner for the following Reimbursable Expenses (see Appendix 1 for rates or charges): [List any such expenses here, or indicate "None."]. 5. The portion of the Lump Sum amount billed for Engineer's services will be based upon Engineer's estimate of the percentage of the total services actually completed during the billing period. If any Reimbursable Expenses are expressly allowed, Engineer may also bill for any such Reimbursable Expenses incurred during the billing period. B. Period of Service: The compensation amount stipulated in Compensation Packet BC-1 is conditioned on a period of service not exceeding [Number of Months] months. If such period of service is extended, the compensation amount for Engineer's services will be appropriately adjusted. ---PAGE BREAK--- Exhibit J—Payments to Engineer for Services and Reimbursable Expenses. Appendix 2: Standard Hourly Rates Schedule. Exhibits to EJCDC® E-500, Agreement between Owner and Engineer for Professional Services. Copyright© 2020 National Society of Professional Engineers, American Council of Engineering Companies, and American Society of Civil Engineers. All rights reserved. Page 1 of 1